Front Crankshaft Oil Seal Installation Tool for PSA HDi and Jaguar Land Rover TDV6, as 0195-D, 303-1121A, 303-1122
-
Code:124552
-
Weight:0.750 Kgs
Overview:
✔ For installing the front PTFE crankshaft oil seal
✔ Suitable for PSA 2.7L and 3.0L HDi engines
✔ Suitable for Jaguar and Land Rover 3.0L TDV6 engines
✔ Installation cone brings the PTFE seal to the required fitting diameter
✔ Installation sleeve ensures straight fitting to the correct depth
✔ For use as PSA 0195-D and Jaguar Land Rover 303-1121A, 303-1122
Special tool kit for installing the front PTFE crankshaft oil seal on PSA 2.7L and 3.0L HDi engines and Jaguar Land Rover 3.0L TDV6 engines.
PTFE oil seals must be brought to the required installation diameter before fitting. The installation cone gradually expands and guides the seal onto the crankshaft, while the installation sleeve presses it evenly into position until it reaches the specified stop.
This controlled procedure enables professional installation without deforming or damaging the sensitive sealing lip.
PTFE Oil Seal Installation
PTFE oil seals must always be installed completely dry and free from oil or grease.
- Remove the old oil seal using a suitable special tool
- Slide the new oil seal, front side first, over the installation cone and onto the crankshaft
- Remove the installation cone
- Use the installation sleeve and central bolt to press the oil seal fully against the specified stop
Possible Tightening Torque
Reference: Land Rover Range Rover L322 with 4.4L TD 448DT engine
- Crankshaft pulley central bolt: 100 Nm + 103° + 35°
We recommend removing the starter to allow the flywheel to be securely counter-held. Always verify the applicable manufacturer specifications for the respective engine and vehicle.
Suitable Engine Codes
- Citroën, Peugeot: DT17TED4, DT20C, UHZ
- Jaguar, Land Rover: AJTDV6, 306DT, TDV6, 448DT, DITC
Suitable for Oil Seals As
- Citroën, Peugeot: 0326.28, 0326.29
- Jaguar, Land Rover: C2C 11491, LR002452, 1102415
For Use As
- Citroën, Peugeot: 0195-D, 0195D, comprising tools as 0195-D-1 and 0195-D-2
- Jaguar, Land Rover: 303-1121A, 3031121A, 303-1122, 3031122
Scope of Delivery
- 1 x front crankshaft oil seal installation tool, for use as 303-1121A and 0195-D-1
- 1 x front crankshaft oil seal installation cone, for use as 303-1122 and 0195-D-2
Original numbers are for comparison purposes only; this is not an original tool!