Wheel Bearing Tool Set 116 pcs for Bushings, Compact & Standard Bearings with Hydraulic System and Service Cart

This complete 116-piece wheel bearing tool system supplied in a robust workshop service cart includes nearly all specialized tools required for efficient removal and installation of compact wheel bearings, standard wheel bearings, bushings and bearing assemblies with through-bore design.

The hydraulic cylinder is mounted using a swivel holder on a transmission jack while the air hydraulic foot pump with clearly readable 0–1000 bar pressure gauge allows safe and comfortable operation.

For operation, the system includes a heavy-duty M20 threaded spindle with magnetic spindle nut, thread adapter for the wheel hub flange, universal conical pressure piece and centering adapters for pressure sleeve applications.

Integrated magnets in the spindle nut and adapters simplify installation and positioning of sleeves and adapters during repairs.

Compact Wheel Bearing Applications

For compact wheel bearings integrated with wheel hubs, the set includes:

• 8 half-shell sets with dedicated adapters
• Coverage of common market applications
• 3 centering and correction half-shell pairs
• Alignment support during installation
• Individual storage cases for each half-shell set

The included Ø170/180 mm press bell allows:

• Direct vehicle use
• Workshop press operation
• Universal press applications

Standard Bearing & Bushing Applications

For standard wheel bearings and axle components with through-bore construction:

• Pull and pressure sleeves
• 28 pressure discs
• 28-piece pull and pressure sleeve set
• 5 trapezoidal threaded spindles for mechanical operation
• Pressure sleeves with internal diameter Ø85–100 mm
• Foam storage system with labeling

Ideal Applications

• Removal and installation of compact wheel bearings (VAG, PSA, Mercedes, Ford, Opel and others)
• Front and rear wheel bearing replacement
• Control arm bushing replacement
• Front and rear axle bearing service
• Rear axle and silent bushing replacement
• Seal and bushing installation/removal
• Hydraulic removal of seized driveshafts and wheel hubs
• Workshop press applications

Key Features

• Hydraulic and mechanical operation
• Complete 116-piece workshop system
• Service cart with organized storage
• Heavy-duty workshop construction
• Modular and expandable system
• Quick access layout with foam inserts
• Professional workshop quality

Important Information

Wheel bearing and axle repairs are among the highest wear applications in workshops. Depending on specific vehicle designs, pressure sleeves or pressure plates may require modifications for certain vehicle applications.

Replacement pressure pieces and pressure plates can be ordered separately when required.

Hydraulic Components

• 1 × Item no. 102754 Hydraulic cylinder, 18.2 t, double-acting, spring-loaded, hollow piston cylinder M20×2.5
• 1 × Item no. 106831 Pneumatic-hydraulic foot pump with quick coupling and 2.2 m hose
• 1 × Item no. 115251 Pressure gauge, 0–1000 bar, for hydraulic pump Item no. 106831

Hydraulic Component Accessories

• 1 × Item no. 123382 Swivel holder for hydraulic cylinder / hollow piston cylinder Ø 80.5 mm, for transmission jack
• 1 × Item no. 119105 Pulling and pressing spindle M20×2.5, length 500 mm, for hollow piston hydraulic cylinders
• 1 × Item no. 119104 Spindle nut M20×2.5 with centering feature and magnetic holder for pull and press sleeves
• 1 × Item no. 118894 Adapter plate for hydraulic cylinder 102754, for mounting press sleeves, M42×2
• 1 × Item no. 119103 Adapter plate for centering pull and press sleeves with centering Ø35×42 mm
• 1 × Item no. 120811 Universal conical pressure piece for wheel bearing / wheel hub removal and installation Ø 30–50 mm
• 1 × Item no. 123155 Thread adapter, male thread 2 1/4"x14 UNS to female thread M20×2.5, for reducing hydraulic thread connection to M20 spindle

Universal Tools

• 1 × Item no. 123148 Wheel hub and driveshaft puller flange Ø 160 mm, suitable for 3-, 4-, 5-, and 6-hole patterns, PCD 98–135 mm
• 1 × Item no. 117908 Press and pull sleeve set with trapezoidal-thread spindles, 28 pcs.
• 1 × Item no. 122848 Press and pull sleeve set, 4 pcs., Ø 85–100 mm
• 1 × Item no. 122814 Flat pressure piece set Ø 38–97 mm, 28 pcs., for bearing, bushing, and seal removal & installation

Tools for Compact Wheel Bearings

• 1 × Item no. 122805 Press bell Ø 170/180 mm for holding half shells for hydraulic wheel bearing removal/installation
• 1 × Item no. 123142 Compact wheel bearing tool for PSA, Citroën, Opel, Peugeot, Toyota Ø 92 mm
• 1 × Item no. 123143 Compact wheel bearing tool for Ford, Volvo, Mazda Ø 78 mm
• 1 × Item no. 123144 Compact wheel bearing tool for Ford, Volvo, Land Rover Ø 82 mm
• 1 × Item no. 123145 Compact wheel bearing tool for Mercedes Sprinter Ø 96 mm (906, 907, 910), VW Crafter (2E, 2F)
• 1 × Item no. 123146 Compact wheel bearing tool for Mercedes Vito, Viano, V-Class Ø 92 mm
• 1 × Item no. 123147 Compact wheel bearing tool for VAG Ø 85 mm
• 1 × Item no. 123149 Compact wheel bearing tool for VAG Ø 72 / 78 mm
• 1 × Item no. 123150 Compact wheel bearing tool for Opel Insignia, front and rear axle
• 1 × Item no. 124300 Centering and alignment half-shell set, 6 pcs., universal, prevents misalignment during wheel bearing installation

Workshop Trolley, Foam Inserts & Storage Cases

• 1 × Item no. 122006 Workshop/service trolley, open design with perforated panel, 776 × 420 × 750 mm, load capacity 3 × 50 kg / total 150 kg
• 1 × Item no. 123213S Foam insert 1/3 for pressure piece set, 28 pcs.
• 1 × Item no. 980001S Foam insert 3/3 for press and pull sleeve sets Item no. 980001
• 1 × Item no. 122064 Pegboard hook, single arm, 50 mm, 5 pcs.
• 1 × Item no. 122065 Pegboard hook, double arm, 50 mm, 5 pcs.
• 1 × Item no. 118786 Storage tray / can holder for workshop trolley and pegboard, width 270 mm
• 7 × Item no. 115268 Stahlmaxx storage case 1/6*
• 1 × Item no. 115269 Stahlmaxx storage case 1/3*

Storage cases are not shown in the product image for clarity purposes.