Ball Joint Separator with Locking Groove 20–22 mm
-
Code:115172
-
Weight:1.250 Kgs
Overview:
✔ Universal ball joint separator with locking groove
✔ Suitable for tie rod ends, ball joints and stabilizer links
✔ Locking groove secures the joint stud and helps prevent slipping during removal
✔ Adjustable in two working positions: 30 mm and 52 mm
✔ Forged and hardened construction for high durability
✔ Fine-thread pressure spindle for controlled force application
✔ Drive via 24 mm hex or 1/2" ratchet
This professional ball joint separator is designed for the removal of ball joint studs from tie rod ends, suspension ball joints and stabilizer links on the front axle. Its universal design makes it suitable for a wide range of vehicle applications.
A special locking groove secures the joint stud during operation, significantly reducing the risk of the separator slipping off while force is being applied. This improves safety and efficiency when working on stubborn or heavily loaded joints.
The tool can be used in two adjustable working positions with clamping heights of 30 mm and 52 mm, allowing it to accommodate different component sizes. The fine-thread pressure spindle provides precise and controlled force transmission during separation.
Manufactured from forged and hardened steel with a matte chrome-plated finish, the separator is designed for demanding workshop environments and daily professional use.
Applications
Suitable for:
- Tie rod ends
- Suspension ball joints
- Stabilizer links
- Steering components
- Front axle suspension components
- Passenger vehicles
OE comparison number:
3287, KM-507-C, CH-507-C, KM507C, KM507, 3287A, VW3287
Technical Specifications
- Jaw opening: 20–22 mm
- Locking groove: Yes
- Adjustable working height: 30 mm or 52 mm
- Pressure spindle: Fine-thread design
- Drive: 24 mm external hex
- Drive compatibility: 1/2" ratchet
- Construction: Forged and hardened
- Surface finish: Matte chrome-plated
