STAHLMAXX

Overview:
✔ For removing seized or freely spinning glow plugs
✔ Suitable for glow plugs with damaged threads
✔ Slim design for narrow and deep glow plug bores
✔ Hardened stainless-steel construction
✔ Available for 8 mm and 10 mm glow plugs

Overview:
✔ Universal support for moving the engine towards the front or rear of the vehicle
✔ Connects the engine to the front subframe for controlled positioning
✔ Holds the engine against the resistance of the engine mounts
✔ Facilitates transmission, catalytic converter and exhaust system repairs
✔ Suitable for many VAG 6-speed manual and 6- or 7-speed DSG transmissions
✔ Universally usable on a wide range of vehicles
✔ For use as VAG T10235, T10533 and T50015

Overview:
✔ Special socket for the piston cooling oil pressure control valve
✔ Enables removal and installation of the valve in confined spaces
✔ Suitable for Mercedes OM651, OM654 and OM656 engines
✔ Suitable for valves as Mercedes A6511800115
✔ Special profile for secure engagement with the valve
✔ For use as Mercedes W 651 589 000 900 / W651589000900

Overview:
✔ For installing front crankshaft oil seals and sealing flanges
✔ Suitable for FPM, ACM and PTFE oil seals
✔ For selected VAG 1.4L and 1.6L TSI/TFSI engines
✔ Enables controlled pressing of the seal into its fitting position
✔ To be used as VAG T10117

Overview:
✔ Professional-quality Stahlmaxx installation tool
✔ For front crankshaft oil seals on selected Volvo 1.5L and 2.0L engines
✔ Precisely manufactured for accurate positioning and an exact fit
✔ Enables installation according to the manufacturer’s specifications
✔ For use as Volvo 9997682

Overview:
✔ For installing the front crankshaft oil seal
✔ Suitable for numerous Mercedes petrol and diesel engines
✔ Ensures centred and even installation
✔ Helps prevent tilting and damage to the sealing lip
✔ Recommended for use with Elring oil seal 424.841
✔ Covers several superseded Mercedes special-tool references

Overview:
✔ For installing and replacing front intake and exhaust camshaft oil seals
✔ Suitable for VAG EA211 TSI and TFSI engines
✔ Also suitable for compatible Ford 1.5L EcoBoost engines
✔ Guide sleeves prepare PTFE seals for safe installation
✔ Ensures the correct oil seal installation depth
✔ For use as VAG T10478B and Ford 303-1720

Overview:
✔ Special tool for installing the transmission-side crankshaft oil seal
✔ Suitable for PTFE and conventional FPM radial shaft seals
✔ Compatible with numerous Opel, Honda, Cadillac, Chevrolet, Daewoo, Alfa Romeo, Fiat, Isuzu, Mazda, Rover and Saab engines
✔ Supports precise alignment of seals with an integrated crankshaft position sensor ring
✔ Includes installation tool and guide sleeve
✔ To be used as Opel KM-658 and Fiat 1860843000, 2000003700

Overview:
✔ Holds the bucket tappet in the depressed position
✔ Enables easy removal of valve adjustment shims
✔ Used after the tappet has been pressed down with a separate tool
✔ Suitable for compatible Hyundai, Kia, Nissan, Toyota and Lexus engines
✔ Supports controlled valve clearance adjustment
✔ Used as Hyundai / Kia 09220-2D000

Overview:
✔ Complete set for fast and controlled valve lapping
✔ Suitable for standard electric and cordless drills
✔ Converts continuous drill rotation into an alternating left-right movement
✔ Includes 22 mm and 28 mm rubber suction cups
✔ Teroson 2-in-1 paste with coarse and fine grinding compounds
✔ Water-soluble paste with good surface adhesion
✔ Paste content: 100 ml

Overview:
✔ Precision-machined centre lock socket for Lamborghini vehicles
✔ Extra-long design for improved clearance during wheel changes
✔ Prevents damage to wheel nuts and bodywork
✔ 3/4" drive for professional torque tools
✔ Designed for use as Lamborghini 470012257

Overview:
✔ Special wrench for removing viscous fan clutches
✔ 32 mm wrench size
✔ Suitable for BMW, Audi, VW and Ford vehicles
✔ Ideal for timing chain, timing belt and cooling system repairs
✔ To be used as BMW 115030, 115040 and VAG 3312

Overview:
✔ Compact bending tool for 4.75 mm brake lines
✔ Ideal for tight bending radii and confined spaces
✔ Especially suitable for uncoated brake lines near the brake caliper
✔ Allows precise bending where larger tools cannot be used
✔ Can be operated by hand, with a 1/4" ratchet or breaker bar
✔ Compact and practical tool for brake line replacement and repair

Overview:
✔ Angled brake bleeder adapter with adjustable 2-lug bayonet locking system
✔ Manufactured entirely from aluminium
✔ Long, freely rotatable adapter hose for confined engine compartments
✔ Adjustable sealing ring for secure and leak-free sealing
✔ Equipped with DN 7.2 quick coupling connection
✔ Suitable for selected Chevrolet, Daihatsu, Nissan and Suzuki vehicles
✔ Compatible as Stierius No. 9, 9A, 83 and Ate 3-0266

Overview:
✔ Designed for separating the brake pedal assembly from the master cylinder ball joint
✔ Suitable for selected Citroën, Peugeot, Fiat and Opel vehicles
✔ Enables quick and damage-free disconnection of the retaining socket
✔ Ensures even spreading of both retaining tabs during removal
✔ Manufactured from durable ASA plastic using high-quality 3D printing
✔ Manufactured as OEM P-0818-Z and CH-52288

Overview:
✔ Extra-slim 36 mm 12-point socket for drive shaft and drivetrain applications
✔ Designed for confined access around wheel hubs and axle nuts
✔ Suitable for drive shafts, CV shafts, rear axle flanges and differential components
✔ Thin-wall design for improved accessibility in restricted spaces
✔ 3/4" square drive for high-torque applications
✔ Suitable for selected BMW, Mercedes-Benz, Jaguar, VAG, Opel, Fiat and other vehicles
✔ Used as VAG T10204, Opel DT-48489 and Mercedes-Benz W220589010900

Overview:
✔ 3-piece replacement abrasive disc set for Wheel Hub Grinder Item no. 122985
✔ Durable abrasive discs with robust coarse thread mounting
✔ High impact, abrasion and wear resistance
✔ Suitable for professional workshop use
✔ Quick and easy replacement of worn discs
✔ Outer diameter: 50 mm
✔ Inner diameter: 14 mm

Overview:
✔ Special puller for wheel bearing inner races on wheel hubs
✔ Suitable for crankshaft timing sprocket removal on TSI, TFSI and BMW engines
✔ Can be used on gearbox shafts and differentials up to Ø 90 mm
✔ Updated version with standard M18 × 1.5 spindle thread
✔ Compatible with slide hammers for easier extraction
✔ Suitable for professional automotive repair and engine service work
✔ Covers a wide range of wheel bearing and drivetrain applications