STAHLMAXX

Flywheel locking tool for selected Fiat engines and equivalent engine types.

Specialized camshaft locking tool for Fiat engines, designed for precise camshaft fixation during timing service and engine repair.

Professional engine timing tool kit for Alfa Romeo 3.2 V6 24V engines, designed for precise TDC setting, timing belt replacement, and engine maintenance.

Adapter M10 for checking and adjusting the fuel injection pump delivery start on selected VW and Audi vehicles.

Professional fuel pressure test kit for checking the low-pressure circuit in diesel injection systems. Includes pressure gauges and adapter hoses for reliable measurement ahead of the high-pressure pump. Ideal for diagnosing fuel supply issues and preventing high-pressure system faults.

Professional special tool kit for replacing injector sealing rings. Includes mounting sleeve and cone for safe, precise installation. Compatible with selected Mercedes, Ford, and Volvo petrol engines.

Adapter for safe removal of plastic injectors from 3.0L TFSI direct-injection engines. M8x1.25 internal thread. Equivalent to T10133/22.

Professional injector extraction claw for safe removal of stuck Delphi Piezo common-rail injectors on Mercedes OM651, OM646*, Kia, and Hyundai engines without removing the cylinder head.

Overview:
✔ Designed for Volkswagen Transporter T4
✔ Supports the engine during transmission removal and installation
✔ For use with a suitable engine support bridge or crossbar
✔ Two adapters are required for supporting the engine
✔ One adapter is included
✔ Used as VAG/VW 10-222A/6

Overview:
✔ Special puller for coil-on-plug ignition coils
✔ Enables controlled removal without damaging the coil housing
✔ Suitable for selected 1.2, 1.4, 1.5 and 2.0 FSI, TSI and TFSI engines
✔ For timing-chain engine applications
✔ Compatible with Audi, SEAT, Skoda, Volkswagen and Porsche
✔ Stahlmaxx-quality tool for daily workshop use
✔ To be used as VAG T10530

Overview:
✔ Adjustable support saddle for transmission jacks
✔ Suitable for piston rods with a diameter of 30 mm
✔ Platform tiltable horizontally and vertically
✔ Adjustable mounting brackets for individual positioning
✔ Long securing chain included
✔ Maximum load capacity: 500 kg

Overview:
✔ Special wrench for releasing the auxiliary belt tensioner
✔ Designed for ribbed and flat drive belt systems
✔ Suitable for Ford and Jaguar 2.0/2.2 TDDi and TDCi engines
✔ Allows controlled belt removal and installation
✔ Suitable for Ford Mondeo models from 2000–2007
✔ For use as 21-235 / 303-676KIT

Overview:
✔ For damage-free installation of flexible ribbed belts and stretch-fit belts
✔ Combines universal and vehicle-specific installation tools
✔ Suitable for belt drives without a conventional tensioner pulley
✔ Covers a wide range of European and Asian vehicle applications
✔ Includes a robust storage case with space for additional tools
✔ To be used as Fiat 2000020400, Renault MOT.2101 and PSA 01161

Overview:
✔ Piston installation tool for VR6 engines
✔ Designed for pistons with a diameter of 81 mm
✔ Guides the piston rings safely into the cylinder liner
✔ Helps prevent damage from the chamfered edge of the cylinder liner
✔ Suitable for engine codes AAA, AFP and AMY
✔ For use as VAG 3278

Overview:
✔ Press tool for installing the front crankshaft oil seal
✔ Suitable for Ford 1.2L Duratec and 1.5L EcoBoost/Duratec engines
✔ Uses the original crankshaft bolt during installation
✔ Supports centred and even pressing of the oil seal
✔ Recommended for use with a suitable flywheel holding tool
✔ To be used as Ford 303-1645

Overview:
✔ Adapter plate for installing the transmission-side crankshaft oil seal
✔ Suitable for BMW N51, N52, N53, N54 and N55 engines
✔ Required for the revised crankshaft oil seal used from 01/2009
✔ For use with installation tool Item no. 101180, as BMW 119180
✔ Designed for the dry installation of PTFE radial shaft seals

Overview:
✔ 10-piece wheel lock key socket set for BMW vehicles
✔ Designed for removing and installing BMW locking wheel nuts
✔ Covers the most common BMW wheel lock profiles
✔ 17 mm hex drive for standard wheel tools
✔ Supplied in a storage case

Overview:
✔ Holding tool for removing and installing viscous fan clutches
✔ Suitable for selected Mercedes-Benz OM611, OM612, OM646, OM647 and M272 engines
✔ Required for timing chain, serpentine belt and water pump service
✔ Prevents the fan clutch from rotating during removal and installation
✔ Designed for professional workshop use
✔ Designed for use as Mercedes-Benz W611589004000