Glow Plug Extractor Set for 8/10 mm Glow Plugs with Damaged Threads
-
Code:118780A
-
Weight:1.600 Kgs
Overview:
✔ For removing seized or freely spinning glow plugs with damaged threads
✔ Slim extraction attachments for narrow and deep glow plug bores
✔ Hardened stainless-steel attachments for 8 mm and 10 mm glow plugs
✔ Slide hammer enables controlled extraction from the cylinder head
✔ Available for 8 mm, 10 mm or both sizes
This extractor set is designed for removing seized or freely spinning glow plugs with damaged threads from the glow plug bore.
The slim design of the extraction attachments allows even glow plugs installed in narrow and deep bores to be reached and removed.
Without a suitable special tool, removing glow plugs that spin freely due to damaged threads is extremely difficult.
Durable Extraction Attachments
The 8 mm and 10 mm extraction attachments are hardened and manufactured from stainless steel to withstand the high mechanical loads encountered during removal.
The selected attachment is connected to the slide hammer, allowing the damaged glow plug to be extracted from the cylinder head.
Available Variants
- For 8 mm glow plugs
- For 10 mm glow plugs
- For 8 mm and 10 mm glow plugs
Scope of Delivery
1 × Slide hammer handle, 143 × 50 mm
1 × Slide hammer weight, 555 g, 50 × 48 mm
1 × Slide hammer rod, 200 mm, M10 × 1.5
1 × Extraction attachment for 8 mm or 10 mm glow plugs, or both attachments depending on the selected variant
