Miscellaneous Engine Tools

Overview:
✔ For high-viscosity sealants, adhesives, lubricants and similar materials
✔ Controlled one-handed operation with pistol grip
✔ Applies a clean and consistent bead of sealant
✔ Assisted feed mechanism for easier dispensing
✔ Empties squeeze tubes almost completely with minimal waste
✔ Particularly suitable for original manufacturer sealant tubes

Overview:
✔ 78-piece universal sealing assortment
✔ For lines, hose ends, connections and injector ports
✔ Suitable for internal and external threads
✔ Flexible caps in 8 sizes from Ø 4 to 18 mm
✔ Tapered plugs in 4 sizes from 4 to 12 mm
✔ Threaded sealing caps in M12 × 1.5, M14 × 1.5 and M16 × 1.5
✔ Protects systems against dirt, moisture and foreign objects
✔ Supplied in a 15-compartment assortment case

Overview:
✔ Four-piece tool set for aligning the front subframe and axle carrier
✔ Suitable for selected Audi models from model year 2015
✔ Restores the subframe to its factory installation position
✔ Correct use can avoid the need for subsequent wheel alignment
✔ Suitable for specified Audi subframe reference numbers
✔ For use as VAG T40327

Overview:
✔ Universal support for moving the engine towards the front or rear of the vehicle
✔ Connects the engine to the front subframe for controlled positioning
✔ Holds the engine against the resistance of the engine mounts
✔ Facilitates transmission, catalytic converter and exhaust system repairs
✔ Suitable for many VAG 6-speed manual and 6- or 7-speed DSG transmissions
✔ Universally usable on a wide range of vehicles
✔ For use as VAG T10235, T10533 and T50015

Overview:
✔ Special tool for aligning the crankcase and upper oil pan
✔ Designed for 1.0L and 1.2L THP three-cylinder engines
✔ Suitable for selected Citroën, Fiat, Opel, Peugeot and Toyota engines
✔ Provides accurate alignment where no original guide pins are fitted
✔ Supports assembly according to manufacturer repair procedures
✔ For use as J-0109-4G, EN-52132 and 2.000.037.171

Overview:
✔ Special M10 XZN ball-end socket bit for confined work areas
✔ Suitable for selected Audi, SEAT, Škoda and Volkswagen 1.6L and 2.0L TDI engines
✔ Designed for intake manifold, EGR cooler, wheel bearing and driveshaft applications
✔ Ball-end design improves accessibility at difficult angles
✔ Length: 100 mm
✔ 1/2" drive connection
✔ Suitable for professional workshop use

Overview:
✔ Special socket for removing and installing the piston cooling shut-off valve
✔ Suitable for Mercedes OM654 and OM656 engines
✔ Designed for the electrically controlled hydraulic valve for the piston oil spray nozzles
✔ Provides access in the restricted installation area at the front of the engine
✔ Special profile for secure engagement with the valve
✔ For use as Mercedes W654589000900 / 654 589 00 09 00

Overview:
✔ Alignment pin set for subframe and engine carrier positioning
✔ Suitable for Audi, VW and Skoda longitudinal platforms
✔ Ensures precise repositioning of subframe after service
✔ Helps avoid wheel alignment after repair
✔ Used as OEM tool 3393

Overview:
✔ Engine lifting eye for safe engine suspension
✔ Designed for BMW N20, N46, N47, N52, N54, N55, N57
✔ Screws into cylinder head threaded mounting point
✔ Enables use of engine crane or support beam
✔ Ideal for engine removal and installation
✔ Provides secure lifting point
✔ Professional workshop tool

Overview:
✔ Tungsten carbide scraper with precision-ground edges
✔ For cleaning gasket surfaces, deposits, rust and adhesive residues
✔ Suitable for steel, aluminium and plastic components
✔ Minimizes the risk of scratches and unwanted material removal
✔ Ergonomic handle with thumb protection on both sides
✔ Ideal for brake maintenance and engine repair

Overview:
✔ Tungsten carbide scraper tip with 32 mm width
✔ For removing gasket residues, carbon deposits, rust and stubborn contaminants
✔ Suitable for steel and aluminium components
✔ Fixed blade with two scraping edges
✔ Can be used in both push and pull directions
✔ Total length: 212 mm

Overview:
✔ For removing gasket residue from sealing surfaces
✔ Suitable for cylinder heads, valve covers and carburettor covers
✔ Extra-long design for difficult-to-reach areas
✔ Replaceable metal scraper blade with a width of 15 mm
✔ Blade head angled by approximately 50°
✔ Overall tool length of 275 mm
✔ Ergonomic two-component handle

Overview:
✔ Replacement blades for item.no. 6665
✔ Blade width of 15 mm
✔ Manufactured from metal
✔ Set includes 5 replacement blades

Overview:
✔ 14-piece set for punching clean, accurately positioned holes
✔ Includes 13 interchangeable hollow punches from 5 to 35 mm
✔ Quick-change punch holder with ergonomic handle
✔ Spring-loaded centering pin for precise positioning
✔ Suitable for gasket paper, cardboard, leather, plastic film and rubber
✔ Covers commonly required hole diameters for workshop use

Overview:
✔ Professional straight edge ruler for checking flat surfaces
✔ Suitable for cylinder heads, engine blocks and transmission measurements
✔ Designed for VAG DSG, Multitronic and CVT transmission service work
✔ Suitable for measuring clutch release bearings K1 and K2
✔ Compatible with valve seat machining and depth measurement procedures
✔ Manufactured from precision special steel
✔ Length 610 mm for cylinder heads up to 6 cylinders
✔ To be used as VAG T40100

Overview:
✔ For accurately drilling broken M6, M8 and M10 studs and bolts
✔ Suitable for bolts broken flush with or below the component surface
✔ Particularly useful for cylinder head studs and manifold bolts
✔ Includes drill guides for 3, 4.5 and 6 mm drill bits
✔ Single-point and adjustable butterfly mounting guides included
✔ Keeps the drill centred and reduces the risk of damaging the original thread

Overview:
✔ For accurately drilling out broken M8 and M10 bolts and studs
✔ Adjustable three-arm drilling guide keeps the drill centred
✔ Low-profile components allow work in confined engine bays
✔ Includes depth stops to prevent damage to cylinder heads and housings
✔ Suitable for manifolds, cylinder heads, gearboxes, differentials and axles
✔ Includes HSS drill bits, guide sleeves and a storage case

Overview:
✔ Supports the cylinder head above the work surface
✔ Protects machined sealing surfaces from damage
✔ Universal design for most common cylinder heads
✔ Particularly useful for engines with overhead camshafts
✔ Cylinder head is positioned on the support pins through existing mounting holes
✔ Includes the two stands required to support one cylinder head