Stretch-Fit Belt Installation Guide for Mercedes, Renault, Dacia and Nissan 1.0/1.3L TCe and DIG-T
-
Code:125020
-
Weight:0.350 Kgs
Overview:
✔ Supports damage-free installation of elastic multi-rib belts
✔ For M200, H4D, H5H, HR10 and HR13DDT engine series
✔ Prevents the belt from slipping off the water-pump pulley
✔ Bolts directly to the water-pump pulley
✔ Integrated 13 mm hexagon for counterholding
✔ Suitable for Mercedes, Renault, Dacia and Nissan applications
This specially designed installation guide simplifies the fitting of elastic multi-rib belts, also known as stretch-fit or self-tensioning belts, on M200, H4D, H5H, HR10 and HR13DDT engines.
The guide plate prevents the belt from slipping off the water-pump pulley during installation, reducing the risk of belt damage and injury.
Important Information
Installing an elastic multi-rib belt can be difficult even when using the specified manufacturer tools because the belt may jump off the water-pump pulley.
The Stahlmaxx guide plate is bolted directly to the water-pump pulley and holds the belt axially in position until installation is complete.
Application
- Loosen two bolts on the water-pump pulley.
- Use the integrated 13 mm hexagon on the guide plate for counterholding while loosening and subsequently tightening the bolts.
- Position the adapter plate and secure it using the original bolts and washers.
- Install the elastic multi-rib belt over the crankshaft pulley using a suitable special tool, such as item no. 115148 or item no. 113839.
- After installing the belt, remove the bolts one at a time, remove the guide plate and reinstall the original bolts to the specified torque.
Reference Tightening Torque
Reference application: Mercedes Citan W420 with engine M200.731.
- Coolant-pump pulley: 8 Nm
Always verify the tightening torque using the applicable manufacturer repair instructions.
Suitable Vehicles
Dacia:
Dokker, Duster, Jogger, Lodgy, Logan II–III, Sandero II–III
Renault:
Arkana I, Austral, Captur I–II, Clio V, Dokker, Express, Grand Kangoo III, Grand Scénic IV, Kadjar, Kangoo III, Koleos II, Megane IV, Scénic IV, Talisman
Mercedes:
Citan Box Body, Citan Tourer, T-Class Van (W420)
Nissan:
Juke, Micra V, Qashqai II, Townstar, X-Trail III
Compatible Engine Codes
Renault:
H4D 450, H4D 452, H4D 460, H4D 472
H5H 450, H5H 470, H5H 480
Nissan:
HR10DDT, HR13DDT
Mercedes:
M200.731
To Be Used as
Dacia, Renault and Nissan:
Mot.2966, Mot.2101
Mercedes:
Installation guide for the elastic multi-rib belt on M200 engines. This tool is mentioned in the repair instructions, but no comparison number is provided.
Original numbers are provided for comparison purposes only. This is not an original tool.