STAHLMAXX

Overview:
✔ For installing the front crankshaft oil seal
✔ Suitable for Mercedes M176, M177 and M178 engines
✔ Expands the PTFE sealing lip for damage-free installation
✔ Ensures precise positioning of the seal carrier cover
✔ Suitable for Mercedes-Benz and selected Aston Martin models
✔ For use as Mercedes-Benz W177589004300

Overview:
✔ Special removal tool for radial oil seals
✔ Suitable for selected Volkswagen, Audi, SEAT, Škoda and Ford applications
✔ Special hook shape helps prevent damage to adjacent components
✔ Suitable for professional engine repair work
✔ For use as VAG T20143 and Ford 303-1735

Overview:
✔ Special tool for removing oil seals and radial shaft seals
✔ Suitable for controlled extraction from engines, transmissions and other assemblies
✔ Hook design provides secure engagement behind the seal
✔ Replaceable claw available under Item no. 116106
✔ Suitable for professional workshop use

Overview:
✔ Special tool set for removing and installing the front crankshaft oil seal
✔ Suitable for BMW engines N20 and N26
✔ Supports controlled extraction and precise installation of the radial shaft seal
✔ For use with oil seals supplied with an installation sleeve
✔ Extension available for BMW S55 engines under Item no. 120729
✔ To be used as BMW 110370, 2212822 and 119230

Overview:
✔ For tightening and loosening cylinder head bolts on Ford 2.0 EcoBlue engines
✔ Installs in the injector bore to support the torque multiplier
✔ Suitable for numerous Ford passenger and commercial vehicles
✔ Improved compact design for faster and easier workshop use
✔ Eliminates repeated changing of mounting screws during operation
✔ Includes a holding tool and 17 mm socket

Overview:
✔ Lever-operated valve depressor for Mercedes-Benz M115, M116 and M117 engines
✔ Enables replacement of hydraulic valve clearance adjusters without removing the camshaft
✔ Suitable for selected 2.3–5.5 L petrol engines
✔ Designed for hydraulic adjusters screwed into the cylinder head with a 24 mm hex
✔ Based on the discontinued Mercedes-Benz special-tool design
✔ Used as W123589036113 and as W116589006100

Overview:
✔ Torque range: 20–120 Nm
✔ Suitable for clockwise and counterclockwise tightening
✔ Fine-tooth ratchet head with 72 teeth
✔ 3/8" drive with socket-retention and quick-release function
✔ Full-metal construction with durable powder coating
✔ Clearly readable scale adjustable in 1 Nm or 1 lbf·ft increments
✔ Accuracy of 3% or better according to DIN, ISO and ASME requirements
✔ Individual test certificate and robust storage case included

Overview:
✔ Special holding tool for Mercedes OM651 engines without ECO Start-Stop
✔ Designed for safe removal and installation of the viscous fan clutch
✔ Suitable for Mercedes Sprinter, Vito and Viano
✔ Ideal for timing chain, serpentine belt and cooling system repairs
✔ To be used as Mercedes W651589064000

Overview:
✔ 10-piece pressure sleeve set for brake caliper piston dust seals
✔ For easy, professional and damage-free installation of externally pressed dust seals
✔ Developed for dust seals that are pressed onto the outside of the caliper housing
✔ Closed sleeve design improves handling, stability and durability
✔ Can be used with standard hand tools or a brake piston wind-back tool
✔ Use as ATE 03.9314-4910.1, VAG T10146 and T50088

Overview:
✔ Vacuum and pneumatic extractor designed for fuel system bleeding
✔ Suitable for cars, commercial vehicles and motorcycles
✔ Can be used for extracting coolant, power steering fluid and other operating fluids
✔ Partially suitable for brake bleeding applications
✔ All components are resistant to brake fluid
✔ Operates with compressed air at 5–8 bar
✔ Maximum vacuum level of 60%
✔ 1L container with 1/4" compressed air connector included

Overview:
✔ Professional 8-piece ABS sensor bore cleaning set
✔ Cleans rust, dirt and sensor residue from ABS sensor mounting bores
✔ Includes special drill bit for removing seized sensor cores
✔ Precision reamers with sharp cutting edges for efficient cleaning
✔ Includes adjustable-angle 1/4" ratchet for confined working areas
✔ Suitable for VAG, BMW, Mercedes-Benz, Opel, Mazda and Ford applications

Overview:
✔ 2-piece M12 XZN socket set for bolted wheel bearing units on VAG vehicles
✔ Allows wheel bearing removal and installation without removing the driveshaft
✔ Suitable for Audi, Cupra, SEAT, Škoda and Volkswagen vehicles
✔ Includes 78 mm and 120 mm long M12 XZN sockets
✔ Impact wrench suitable Cr-Mo construction
✔ Designed for professional workshop applications
✔ Significantly reduces repair time and labour effort

Overview:
✔ Designed for removal and installation of rear axle compact wheel bearing units
✔ Allows wheel bearing replacement directly on the vehicle
✔ No need to remove the steering knuckle or ABS sensor
✔ Suitable for integrated wheel bearing and wheel hub assemblies
✔ Ensures force is applied correctly to the bearing outer race during installation
✔ Compatible with various Citroën, Opel, Peugeot and Toyota vans
✔ Professional workshop solution supplied in a durable storage case

Overview:
✔ Special 52 mm socket for Land Rover axle nuts
✔ 6-point design for secure engagement and torque transfer
✔ 3/4" drive for heavy-duty applications
✔ Suitable for Land Rover Series, Defender, Discovery and Range Rover Classic models
✔ Professional-grade construction for workshop use
✔ Designed for axle and hub service operations
✔ Durable construction for long service life

Overview:
✔ Special tool for removing front axle ball joints
✔ Designed for Mercedes Sprinter and VW Crafter models from 1996 onwards
✔ Heavy-duty construction for seized and heavily loaded ball joints
✔ Suitable for professional workshop use
✔ Compatible with impact wrench operation
✔ Developed for daily workshop applications
✔ Comparable to Mercedes tool W730589023300

Overview:
✔ Universal ball joint separator for steering and suspension components
✔ Suitable for tie rod ends, ball joints and stabilizer links
✔ Adjustable and lockable in two working positions
✔ Forged and hardened construction for professional use
✔ Fine-thread pressure spindle for precise force application
✔ Adjustable working height of 30 mm or 55 mm
✔ Drive via 24 mm external hex

Overview:
✔ Designed for removal and installation of ball joints
✔ Suitable for Mercedes W201, W124, A124, C124 and R107 models
✔ Enables precise pressing and extraction of ball joints
✔ Compatible with press frames Item no. 117766 and Item no. 117765
✔ Includes four press sleeves in different sizes
✔ Suitable for professional suspension and steering repairs

Overview:
✔ Robust universal brake pedal depressor
✔ Locks and holds the brake pedal in the applied position
✔ Helps prevent fluid loss and air ingress during brake system repairs
✔ Can be secured against the driver's seat or steering wheel
✔ Suitable for hydraulic brake system leak testing
✔ Suitable for testing and adjustment of brake force regulators and limiters
✔ Can be used for wheel alignment procedures
✔ Lockable design for secure positioning