STAHLMAXX

3 kg additional weight for Slide Hammer Art. 116181, designed to increase impact force when removing seized, rusted or tightly fitted components.

Overview:
✔ For installing flexible ribbed belts on the coolant pump
✔ Designed for 3PK stretch-fit belts that cannot be installed with standard universal tools
✔ Fits selected Opel, Peugeot and Citroën 1.0, 1.1 and 1.2 engines
✔ Enables controlled installation over the water pump pulley
✔ For engine codes B12XE, B12XHL, B12XHT, EB0, EB2, EB2DT, EB2F, HMT, HNZ and T9
✔ To be used as EN-52112-2, I.0109-1 and 0109-1B

Overview:
✔ Angled brake bleeder adapter with adjustable bayonet locking system
✔ Suitable for bayonet brake fluid reservoirs with inner neck diameters of 32–35 mm
✔ Long, freely rotatable adapter hose for confined engine compartments
✔ Adjustable sealing ring for secure and leak-free sealing
✔ Equipped with DN 7.2 quick coupling connection
✔ Suitable for use with brake bleeding devices
✔ Compatible as Stierius No. 61A and Ate 03.9302-0923.2, 3-0049

Overview:
✔ Base tool for removing drive shafts and pulling wheel hubs
✔ Suitable for 4- and 5-bolt wheel hubs
✔ Compatible with bolt circle diameters from 98–140 mm
✔ Large 74 mm center bore for hub centering applications
✔ Heavy-duty forged steel construction
✔ Heat-treated for increased strength and fracture resistance
✔ Can be used with common slide hammers when combined with a suitable adapter
✔ Thread size UN 1-1/2" x 16

Overview:
✔ Professional press tool set for rear subframe bushings
✔ Designed for BMW X5 E53 models
✔ Enables rear axle bushing replacement directly on the vehicle
✔ No rear axle removal required
✔ Used together with base tool Item no. 106605
✔ Suitable for removal and installation of rear axle carrier bushings
✔ Allows controlled and damage-free bushing service
✔ Suitable for professional suspension repair work

Overview:
✔ Professional support stand for DSG, S-Tronic, Multitronic, and CVT transmissions
✔ Designed for clutch unit and input shaft package measurement procedures
✔ Prevents damage to sensitive oil pipes during servicing
✔ Suitable for Audi transmission repair and assembly work
✔ Supports professional measurement according to repair guidelines
✔ Improved handling during transmission service operations
✔ Suitable for multiple VAG transmission variants
✔ item no. compatible reference: as T40099

Overview:
✔ Special socket tool for automatic transmission oil plugs
✔ Designed for BMW 8HP generation automatic gearboxes
✔ Suitable for transmission oil service and maintenance
✔ Compact design for restricted installation spaces
✔ Equipped with square drive for torque wrench use
✔ Compatible with BMW, Jaguar, Land Rover, Jeep and other brands
✔ Suitable for 8HP, 8P75H and 875RE transmissions
✔ Used as BMW 2455997, 2405614 and JLR 307-452

Overview:
✔ Professional engine support fixture for VW T4 transmission removal
✔ Suitable for VW T4 models with standard front end up to model year 1995
✔ Allows engine movement in all directions during gearbox removal
✔ Designed for 4-cylinder and 5-cylinder engines
✔ Simplifies removal and installation of engine and gearbox mounts
✔ Essential for clutch replacement and transmission service work
✔ Allows transmission removal without releasing torsion bars
✔ Used as VW 3184, 3227 and 3230
✔ Includes support blocks, cross member and mounting wedges

Overview:
✔ Professional 27-tooth spline socket for BMW M differential service
✔ Designed for rotating the rear differential input shaft and drive flange
✔ Essential for rear differential repair and seal replacement
✔ Suitable for BMW M models with locking differential
✔ Compatible with BMW rear differential 215W
✔ 3/4" drive for high torque applications
✔ Used as BMW 2456244 and 83302456244
✔ Suitable for professional workshop use

Overview:
✔ Professional locking and alignment tool for balance shafts
✔ Designed for Opel D15 and F15 engines
✔ Enables precise alignment of the balance shaft to the crankshaft
✔ Locks the balance shaft securely during engine service procedures
✔ Uses factory alignment holes in the balance shaft weight
✔ Compatible with Opel Astra K and Insignia B
✔ To be used as EN-52768

Overview:
✔ Special tool for turning and counter-holding the crankshaft
✔ Mounted using the crankshaft central bolt
✔ Holds securely against the crankshaft pin/key
✔ For Opel 1.5 CRDi and 2.0 CDTi engines
✔ Suitable for Astra K, Crossland P17, Insignia B and Mokka
✔ For engine codes D15DVC, D15DVH, F15DVC, F15DVH, LXD, F20DVH and LSQ
✔ To be used as EN-52783

Overview:
✔ Camshaft alignment and locking tool for chain-driven engines
✔ For 1.0L, 1.2L, 1.4L petrol engines
✔ Aligns camshafts to TDC position
✔ Required for timing chain service and engine repair
✔ Used as EN-953-A
✔ Suitable for workshop use

Overview:
✔ Professional timing chain tool kit for Opel 1.6 SIDI turbo engines
✔ Suitable for EcoFLEX and direct injection petrol engines
✔ Designed for timing chain replacement and engine repair
✔ Includes tools for camshaft, crankshaft and balance shaft locking
✔ Ensures precise timing alignment
✔ Ideal for workshop and professional use

Overview:
✔ Alignment tool for crankshaft sensor positioning
✔ Suitable for Ford and Volvo engines
✔ Ensures precise sensor alignment for accurate engine signals
✔ Designed for use during timing and engine service
✔ Ideal for professional workshop applications

Overview:
✔ Professional counterhold tool for crankshaft vibration damper
✔ Designed for secure locking during loosening and tightening operations
✔ Compatible with Porsche Cayenne and Panamera engines
✔ Supports multiple M46 and M48 engine codes
✔ Prevents crankshaft rotation during service procedures
✔ Used as Porsche 9679/1, 00072196791
✔ Suitable for workshop and professional use

Overview:
✔ Holding and counterhold tool for Porsche intake camshaft
✔ Designed for safe counterholding during engine work
✔ Suitable for Porsche 911 (996) Turbo and GT2 models
✔ Length 540 mm for optimal leverage
✔ Made in Germany – professional quality tool
✔ To be used as OEM 9653 / 00072196530

Overview:
✔ Professional flywheel locking tool for Renault, Mercedes, Nissan and Opel
✔ Designed for 2.3L and 2.5L diesel engines
✔ Compatible with G9U and M9T engine families
✔ Secures flywheel during engine service procedures
✔ Suitable for workshop and professional use

Overview:
✔ Tool for rotating and counterholding crankshaft
✔ Suitable for loosening harmonic balancer bolts
✔ Compatible with Mercedes M139, M254, M256, M274, OM654, OM656
✔ Enables controlled engine rotation during service
✔ Can be used with extension if required
✔ Can be used as Mercedes tool as W654589004000