BGS Technic

This exhaust pipe expander 31–44 mm is designed for fast and secure connection of new exhaust pipes to existing systems. It allows easy expansion of heated pipes to ensure a precise, leak-free fit. The controlled expansion range guarantees stable installation and long-term exhaust system performance.

Overview:
✔ Special puller for coil-on-plug ignition coils
✔ Enables controlled removal without damaging the coil housing
✔ Suitable for selected 1.2, 1.4 and 2.0 FSI engines
✔ For timing-chain engine applications
✔ Compatible with selected Audi, SEAT, Skoda and Volkswagen models from 2013
✔ To be used as VAG T10530
✔ Suitable for daily workshop use

Overview:
✔ Extra-large parts washer for workshops and industrial use
✔ Tank capacity: 150 L
✔ Cleaning-fluid capacity: 90 L
✔ Maximum pump flow rate: 20 L/min
✔ Large work area with component tray and small-parts compartment
✔ Fusible safety link closes the lid automatically in the event of fire
✔ Robust powder-coated steel construction

Overview:
✔ Manual impact tool for loosening stubborn fasteners
✔ 1/2" square drive
✔ Provides high breakaway torque in confined spaces
✔ Suitable for pulley bolts and balance shaft pulleys
✔ Double-layer protective grip
✔ Overall length of 620 mm

Overview:
✔ Extra-flat mounting lever for the serpentine belt tensioner
✔ Designed for Mercedes M270 engines
✔ Short T55 profile for access in confined installation areas
✔ Suitable for selected Mercedes A-Class, B-Class, C-Class, CLA and SLC models
✔ Compatible with tensioners as A2702000070, A2702000170 and 2702000370
✔ For use as Mercedes W270589000700

Overview:
✔ For installing and removing elastic ribbed belts and stretch-fit belts
✔ Suitable for belt drives without a conventional tensioner pulley
✔ Supports applications with single and double pulleys
✔ Helps prevent damage to the belt and pulley during installation
✔ Suitable for numerous petrol and diesel vehicles
✔ Includes four special tool components and three spacer bolts

Overview:
✔ For cleaning glow plug guide bores and extracting seized glow plugs
✔ Includes M10×1.00 and M12×1.25 reamers
✔ Suitable for selected Mercedes-Benz CDI and Smart CDI engines
✔ M10 reamer for OM611, OM612, OM613 and Smart R660
✔ M12 reamer for OM604, OM605 and OM606 4-valve engines
✔ Puller for seized glow plugs with a 10 mm hexagon

Overview:
✔ Replacement stones for honing tool item no. 1157
✔ K180 grit for honing and surface finishing
✔ Stone length: 100 mm
✔ Supplied with retaining pins
✔ Set of three replacement stones

Overview:
✔ Six extra-long E-profile sockets
✔ Sizes E10, E12, E14, E16, E18 and E20
✔ 12.5 mm square drive
✔ Suitable for deeply positioned external Torx bolts
✔ E12 socket suitable for BMW cylinder head bolts
✔ Extended design with a length of up to 150 mm

Overview:
✔ Designed for removing valve adjustment shims
✔ Suitable for OHC engines
✔ Compatible with applications from Audi, Porsche, Ford, Fiat and Volkswagen
✔ Length: 275 mm
✔ Provides extended reach around the valve-train components

Overview:
✔ Manual tool for lapping engine valves
✔ Two rubber suction cups: 16 mm and 21 mm
✔ Wooden handle for controlled rotation
✔ Overall length: 210 mm
✔ Suitable for smaller valves with smooth, clean surfaces

Overview:
✔ Designed for large petrol and diesel engines
✔ Adjustable clamping range: 35–200 mm
✔ Includes two valve spring pressure pieces
✔ Suitable for spring diameters of 21–30 mm
✔ Pressure-piece outside diameters: 25 mm and 30 mm

Overview:
✔ Designed for mounting and demounting truck tyres
✔ Enables tyre changes without a tyre-changing machine
✔ No electrical or pneumatic power supply required
✔ Suitable for 22.5″ and 24.5″ truck tyres
✔ Length: 1310 mm
✔ Size: 28–30 mm

Overview:
✔ Cross wheel wrench for passenger cars
✔ Hex socket sizes: 17, 19 and 21 mm
✔ 12.5 mm (1/2") square drive
✔ Reinforced centre plate
✔ Hardened construction with chrome-plated surface
✔ Arm length: 355 mm
✔ Standard: DIN ISO 3119

Overview:
✔ Replacement hose for tyre inflator guns
✔ Total length: 1 m
✔ Suitable for replacing worn or damaged hoses
✔ Compatible with Item no. 3201, Item no. 3242, Item no. 55400 and Item no. 55410

Overview:
✔ Professional thread repair set for wheel studs and wheel nuts
✔ Repairs damaged internal and external threads
✔ Split dies allow thread restoration behind damaged thread sections
✔ Suitable for most passenger cars and light commercial vehicles
✔ Compatible with many PSA, Mercedes-Benz, BMW, Volvo and VAG models
✔ Manufactured from durable 20CrMo steel

Overview:
✔ 3-piece special socket set for BMW locking wheel nuts
✔ Designed for removing and installing selected BMW wheel locks
✔ Includes three common BMW wheel lock profiles
✔ Professional workshop quality
✔ Suitable for replacement or expanding existing wheel lock key sets

Overview:
✔ Compatible with the BGS 18 V battery system
✔ Brushless motor for high performance and extended runtime
✔ Ideal for polishing, paint correction and light sanding
✔ 6-speed variable speed control up to 2,200 rpm
✔ Includes wool polishing pad and sanding disc