BGS Technic

Overview:
✔ 50 m H05RR-F rubber cable, 3 × 1.5 mm²
✔ Four earthed sockets with protective covers
✔ IP44 protection against solid foreign objects and splashing water
✔ Suitable for temporary outdoor use
✔ Thermal cut-out trips if the cable temperature becomes too high
✔ Maximum load: 1,000 W when wound, 3,500 W when fully unwound

Overview:
✔ 3.5 L capacity with pouring spout
✔ Resistant to most solvents at temperatures up to 60 °C
✔ Resistant to acids, alkalis, alcohols, oil and petrol
✔ 265 mm diameter and 60 mm height
✔ Made from high-density polyethylene (HDPE)

Overview:
✔ COB-LED work light, illuminated magnetic pick-up tool and 1/3 tool tray
✔ Work light: 400 lm main light and 120 lm top light
✔ Magnetic mounting, two rotating hooks and an adjustable handle
✔ Pick-up tool: 600 mm long with LED-lit tip and up to 1.5 kg lifting capacity
✔ Tray dimensions: 408 × 189 × 32 mm

Overview:
✔ Double-joint design for working in confined and difficult-to-reach areas
✔ Suitable for interior trim, dashboards and engine compartments
✔ Slim profile remains narrow even when the jaws are fully open
✔ Extended 295 mm length for deeper access
✔ Two-component handles for controlled handling

Overview:
✔ For insulated and non-insulated electrical terminals
✔ Integrated wire cutter and wire-stripping sections
✔ Screw cutter for M2.6 to M5 screws
✔ Blue soft-grip handles
✔ Material thickness: 3 mm
✔ Overall length: 235 mm

Overview:
✔ 30-piece solder seal wire connector assortment
✔ Transparent heat-shrink sleeves with color-coded and solder rings
✔ Simultaneous soldering and shrinking through heating
✔ Solder melts and joins the cable ends when heated with a hot-air tool
✔ High tensile and elongation strength
✔ IP67 protection rating
✔ Supplied in a practical organizer case

Overview:
✔ Long 350 mm cable ties
✔ Width: 4.5 mm
✔ Made from durable nylon
✔ Black finish
✔ Pack of 50 cable ties

Overview:
✔ Allows easy lifting and carrying of automotive batteries
✔ Adjustable width from 110 to 180 mm
✔ Maximum load capacity 35 kg
✔ Robust metal construction
✔ Suitable for a wide range of vehicle batteries
✔ To be used as GE49379

Overview:
✔ Special puller for easy and controlled removal of VAG ignition coils
✔ Reduces the risk of damage to the coil housing and surrounding components
✔ Suitable for selected 1.0, 1.2 and 1.4 TSI/TFSI engines
✔ Also suitable for selected 2.0 GTI engines
✔ Compatible with Volkswagen, Audi, SEAT and Skoda models
✔ Covers a wide range of VAG engine codes
✔ Suitable for professional workshop use

Overview:
✔ 75 L tank capacity
✔ For cleaning small automotive, workshop and industrial parts
✔ Suitable for mildly alkaline, water-soluble cleaning agents
✔ Robust powder-coated sheet-steel construction
✔ Mobile design with four Ø 100 mm casters
✔ Protective lid, storage shelf and illuminated on/off switch

Overview:
✔ Designed for damage-free crankshaft pulley removal
✔ Two-arm and three-arm configurations
✔ Suitable for pulleys with 3, 4, 5 or 6 mounting holes
✔ Compatible with bolt circles from Ø48 to 114 mm
✔ Suitable for many vehicles, including VW T4 and Audi A3
✔ M8 and M10 puller bolts included

Overview:
✔ For installing and removing stretch-fit ribbed belts
✔ Designed for belt drives without a conventional tensioner pulley
✔ Universal application for numerous engines
✔ Suitable for most common pulley sizes
✔ Facilitates controlled belt installation and removal
✔ Includes one removal tool and four installation tools

Overview:
✔ For twisting off electrical terminals and electrodes from damaged glow plugs
✔ Designed for use with item no. 8297
✔ Six sizes from 2.6 to 8.25 mm
✔ Uniform 6.3 mm (1/4") internal square drive
✔ Supports the preparation of broken glow plugs for drilling and extraction
✔ Suitable for professional glow plug repair work

Overview:
✔ Special socket set for glow plugs with permanently attached connection cables
✔ Slotted design allows the cable to pass through the socket
✔ Suitable for newer Fiat, Alfa Romeo and Lancia models
✔ Includes socket sizes 8, 9 and 10 mm
✔ External hex drive for use with a suitable wrench or socket
✔ Supports controlled removal without damaging the connection cable

Overview:
✔ Replacement stones for honing tool item no. 1157
✔ K280 grit for fine surface finishing
✔ Stone length: 75 mm
✔ Supplied with retaining pins
✔ Set of three replacement stones

Overview:
✔ For removing crankshaft and camshaft radial oil seals
✔ Suitable for many VAG petrol engines
✔ Conical profile grips the oil seal securely from the inside
✔ Includes six pullers in short and long versions
✔ Includes a thrust bolt for use with non-protruding shafts

Overview:
✔ Special tool set for aligning the cylinder head gasket and cylinder head
✔ Suitable for Volkswagen, Audi, SEAT and Škoda vehicles
✔ Can also be used universally on many other engines
✔ Replaces locating sleeves and pins omitted from many VAG engines
✔ Prevents incorrect alignment and damage to the cylinder head gasket
✔ Includes M9 and M10 guide pins plus two removal tools

Overview:
✔ Designed for depressing bucket tappets during valve clearance adjustment
✔ Enables removal of valve adjustment shims
✔ Suitable for various European OHC engines
✔ Compatible with selected Opel, Volvo, Citroën, Peugeot and Renault applications
✔ Suitable for Opel 15DT, X17DT, X17DTH and Z17DTH engines
✔ Used as KM-6090, as 0132-AF and as Volvo 9995022