Cross-Handle Torque Wrench, 1/2", 70–170 Nm
-
Code:6835
-
Weight:2.130 Kgs
Overview:
✔ Designed specifically for changing wheels on passenger cars
✔ Controlled tightening of right-hand-threaded wheel fasteners
✔ Adjustable torque range: 70–170 Nm
✔ Audible click with an accuracy of ±4%
✔ Can be used as a non-torque cross wrench for loosening
✔ Spinner mode enables rapid loosening and preliminary tightening
✔ Includes 17, 19 and 21 mm sockets
✔ Detachable design for space-saving storage
This specialised cross-handle torque wrench is designed for changing wheels and controlled tightening of right-hand-threaded wheel fasteners on passenger cars.
The torque can be adjusted between 70 and 170 Nm, allowing wheel fasteners to be tightened to the specified torque.
Tightening and Loosening
The torque mechanism operates during clockwise rotation. An audible click indicates when the preset torque has been reached.
For loosening wheel fasteners by turning anticlockwise, the tool can be used as a conventional cross wheel wrench without torque control.
Spinner Mode
The spinner mode allows wheel fasteners to be loosened and preliminarily tightened quickly. Final tightening must be performed using the required torque setting.
Space-Saving Storage
The tool can be disassembled after use, reducing the space required for storage in the workshop or vehicle.
Technical Specifications
- Drive profile: male square
- Drive size: 12.5 mm (1/2")
- Torque range: 70–170 Nm
- Torque activation: clockwise rotation
- Release type: audible click
- Release accuracy: ±4%
- Fine scale: 1 Nm
- Handle-bar length: 230 mm
- Crossbar length: 490 mm
Scope of Delivery
- Cross-handle torque wrench
- Socket: 17 mm
- Socket: 19 mm
- Socket: 21 mm
Safety Information
The tool is intended exclusively for the controlled tightening of right-hand-threaded wheel fasteners on passenger cars and for loosening them by anticlockwise rotation. Use for any other purpose may damage the tool and cause injury.
