Subframe Bushing Press Tool Set for Audi Q7, VW Touareg and Porsche Cayenne
Price:
€145.00
283.60лв.145.00EUR
Code:
123481
Weight:
3.980Kgs
Overview:
✔ Designed for removal and installation of subframe bushings at the front and rear axle
✔ Suitable for Audi Q7, VW Touareg and Porsche Cayenne
✔ Can be used directly on the vehicle without complete subframe removal
✔ Compatible with both hydraulic and mechanical applications
✔ Suitable for front and rear subframe bushings with similar diameters
✔ Professional workshop tool set comparable to VAG T10301 components
This specialized tool set is designed for the removal and installation of subframe mounting bushings in the front and rear subframe assemblies of selected Audi, Volkswagen and Porsche vehicles.
Because the front and rear bushings have nearly identical diameters, the same tool components can be used for both applications.
The bushings can be serviced directly on the vehicle after lowering the subframe, reducing repair time and avoiding unnecessary disassembly.
Vehicle Compatibility
Suitable for:
Audi
Audi Q7 (4LB) 2006–2016
Volkswagen
VW Touareg (7LA, 7L6, 7L7) 2002–2013
VW Touareg (7P5, 7P6) 2010–2019
Porsche
Porsche Cayenne (9PA) 2002–2011
Porsche Cayenne (92A) from 2010
Compatible Bushing References
Suitable for bushings such as:
Lemförder
36661 01
35950 01
35951 01
Meyle
100 610 0053
VAG
OEM 7L0 499 035 A
OEM 7L0 499 035 B
OEM 7L0 499 035 C
Porsche
OEM 955 341 133 01
Features
Removal and installation of front and rear subframe bushings
Service possible directly on the vehicle
Suitable for hydraulic or mechanical operation
Designed for professional workshop use
Precise alignment during installation
Heavy-duty construction
Installation and Removal
The procedure for front and rear axle bushings is identical.
Before removal:
Mark the original bushing position and transfer the markings to the replacement bushing
Apply sufficient lubricant to the spindle and bushing surfaces
Lower the subframe approximately 30–40 mm
For vehicles equipped with air suspension, activate the vehicle's jack mode before beginning work.
For V8 TDI models from 2011 onwards, the thrust washer must be counter-held during installation.
Technical Notes
This set does not include a spindle.
For hydraulic operation:
Hydraulic cylinder with M20 pull spindle required
For mechanical operation:
Pull and pressure spindle with minimum M16 thread required
Recommended tightening torques:
Subframe bolts: 120 Nm + 180°
Control arm nuts: 180 Nm
Reference Tool
Can be used in the same manner as:
VAG T10301/3
VAG T10301/4
VAG T10301/5
VAG T10301/6
VAG T10301/7
VAG T10301/15
(Components of VAG T10301)
Package Contents
1 × Pressure adapter No. 1 for removal, Ø 91 mm (as T10301/5)