Rear Crankshaft Oil Seal Press Sleeve for VAG and Ford, as T10122/3, 303-505 and 21-208
Price:
€64.50
126.15лв.64.50EUR
Code:
117752
Weight:
0.640Kgs
Overview:
✔ Press sleeve for installing the flywheel-side crankshaft oil seal
✔ Suitable for selected VAG 3.0L TFSI, 3.2L FSI and 4.2L FSI engines
✔ Designed for controlled installation of PTFE oil seals
✔ Helps prevent deformation and folding of the sealing lip
✔ Can be installed by hand or with careful, light tapping
✔ For use as VAG T10122/3, Ford 303-505 and 21-208
Special press sleeve for installing the flywheel-side crankshaft oil seal on selected VAG engines.
Before installation, the PTFE oil seal is expanded using installation aid item no. 117750, as T10122/1, and placed onto guide sleeve item no. 117751, as T10122/2.
Installing the Crankshaft Oil Seal
The crankshaft oil seal is pressed into position using this press sleeve, for use as VAG T10122/3, Ford 303-505 and Ford 21-208.
Wherever possible, press the oil seal into position by hand. If necessary, use careful, light taps to seat it evenly without damaging the seal.
Preventing Damage and Oil Leakage
There is a risk of the sealing lip folding over during installation, which can damage the oil seal and cause oil leakage.
After installation, check that the oil seal and its sealing lip are positioned correctly.
For removal, we recommend puller hooks item no. 116542, for use as T20143.