Professional Locking Circlip Pliers for Internal & External Rings, 10–100 mm

Heavy-duty universal circlip pliers for repair work on suspension components, wheel bearings, transmissions, differentials and other assemblies secured with internal or external retaining rings.

The locking mechanism allows the ring to be opened or compressed in a controlled manner and held securely in position. Adjustment can be carried out manually using the knurled screw or with a 3/8" square drive.

Controlled and Secure Operation

Conventional hand-operated circlip pliers can require considerable hand force, especially with large or heavily tensioned retaining rings.

This can increase the risk of the tool slipping, the ring springing out unexpectedly or the retaining holes becoming damaged.

The locking mechanism of these professional pliers reduces the required hand force and allows the retaining ring to be operated more progressively and securely.

Wide Adjustment Range

With a working range of approximately 10–100 mm, the pliers are suitable for both smaller and larger retaining rings.

Three interchangeable tip pairs with diameters of 2.5 mm, 3.0 mm and 3.5 mm allow the tool to be adapted to different ring sizes and retaining holes.

The ergonomic handles provide a secure grip during workshop use.

Technical Data

• Operation: Manual via knurled screw or with 3/8" square drive

• Working range: 10–100 mm

• Tip material: CrMo steel

• Interchangeable tip sizes: Ø 2.5 / 3.0 / 3.5 mm

• Suitable for: Internal and external circlips

Replacement Parts

The interchangeable tips are wear parts and can be replaced when required, helping extend the service life of the tool.

Scope of Delivery

• 1 x universal locking circlip pliers for internal and external rings, working range 10–100 mm

• 1 x pair of tips Ø 2.5 mm

• 1 x pair of tips Ø 3.0 mm

• 1 x pair of tips Ø 3.5 mm