Transmission Oil Residual Drain Tool Set for BMW & Mercedes Automatic Transmissions
-
Code:115405
-
Weight:1.600 Kgs
Overview:
✔ Professional tool set for near-complete draining of automatic transmission oil
✔ Removes residual oil using compressed air after standard draining
✔ Allows extraction of up to 2.6L additional old transmission oil
✔ Designed for BMW, Mercedes-Benz, Audi, Chrysler NAG1 and compatible transmissions
✔ Suitable for BMW 6HP / 8HP and Mercedes 722.6 / 722.9 transmissions
✔ Ensures maximum refill capacity with fresh transmission oil
✔ Reduces contamination from remaining old oil
✔ Ideal for professional automatic transmission servicing
Conventional transmission oil draining methods rely on gravity and cannot fully remove all oil from the transmission system. Depending on the vehicle model, up to 2.6L of old transmission oil can remain trapped inside the transmission after draining.
This transmission oil residual drain tool set is specifically designed to remove remaining transmission oil using compressed air, allowing the transmission to be cleaned nearly completely before refilling with fresh oil.
The system provides a more effective oil change procedure without requiring transmission flushing equipment or transmission removal.
Improved Transmission Oil Replacement Efficiency
After manually draining the transmission oil and removing the oil pan, this tool uses low-pressure compressed air to evacuate remaining fluid from the transmission.
This enables:
- Near-complete removal of old transmission oil
- Improved transmission servicing quality
- Maximum refill capacity with fresh oil
- Reduced contamination between old and new oil
- More efficient automatic transmission maintenance
During testing, the system was capable of removing more than 2.5L of additional residual oil from transmissions with dry fill capacities of approximately 7.7L.
Compressed Air Operation
The tool operates using compressed air and is designed for controlled and safe oil evacuation.
Application Procedure
- Drain the transmission oil manually
- Remove the transmission oil pan
- Connect the compressed air inlet to the air supply
- Connect the compressed air hose to the shut-off valve
- Select the correct transmission adapter
- Install the adapter into the oil drain opening
- Open the shut-off valve and adjust pressure to approx. 0.5 bar
- Remove remaining transmission oil from the system
Transmission Compatibility
Compatible with:
- BMW 6HP 6-speed transmissions
- BMW 8HP 8-speed transmissions
- Mercedes-Benz 722.6 (5G-Tronic)
- Mercedes-Benz 722.9 (7G-Tronic)
- Audi automatic transmissions
- Chrysler NAG1 transmissions
Vehicle Compatibility
Mercedes-Benz 722.6 (5G-Tronic)
Compatible with selected Mercedes-Benz models including:
- C-Class, E-Class, S-Class, M-Class
- W140, W163, W220, W221, W210, W211, W212
- W202, W203, W204, W208, W209, W463
- R170, R129, R230, C215, C216, SLR
Additional compatible vehicles:
- Jeep: Grand Cherokee, Commander, Wrangler
- Dodge: Durango, Magnum, Challenger, Charger, Nitro
- Chrysler: 300, Crossfire
- Jaguar: XK, X308
- Porsche: 911 (996)
- SsangYong: Rexton, Kyron, Rodius, Actyon, Chairman
Mercedes-Benz 722.9 (7G-Tronic)
Compatible with selected Mercedes-Benz models including:
- C-Class, CLK, CLS, E-Class, G-Class
- M-Class, S-Class, SL, SLK, R-Class
- W203, W204, W209, W219, W211, W212
- W207, W463, W164, W221, W230, W171, W251