STAHLMAXX

Overview:
✔ Special tool for removing and installing spark plug connectors
✔ Designed for Mercedes engines with engine code M272
✔ Enables controlled removal without damaging the connector or ignition lead
✔ Facilitates access in confined engine compartments
✔ To be used as Mercedes 272589013300
✔ Suitable for professional workshop use

Overview:
✔ For installing the radial shaft seal on the left transmission flange shaft
✔ Suitable for 6- and 7-speed DSG dual-clutch transmissions
✔ Compatible with DQ381, DQ400E and DQ500
✔ Ensures the correct seal installation depth
✔ Enables precise installation without damaging the seal
✔ For VAG seal part no. 0BH409400E and Elring part no. 914.240
✔ Stahlmaxx professional-quality tool
✔ Use as VAG T10457

Overview:
✔ Professional cleaning of glow plug bores, shafts and sealing seats
✔ Suitable for almost all common glow plug types and thread sizes
✔ Thread sizes: M8×1.0, M10×1.0, M10×1.25 and M12×1.25
✔ Three stepped reamers for M8, M10 and M12 glow plugs
✔ Greased grooves capture loosened carbon deposits
✔ Adjustable depth stop ensures controlled insertion

Overview:
✔ Special tool for aligning the crankcase and upper oil pan
✔ Designed for 1.0L and 1.2L THP three-cylinder engines
✔ Suitable for selected Citroën, Fiat, Opel, Peugeot and Toyota engines
✔ Provides accurate alignment where no original guide pins are fitted
✔ Supports assembly according to manufacturer repair procedures
✔ For use as J-0109-4G, EN-52132 and 2.000.037.171

Overview:
✔ Special centering tool for the piston pin mandrel
✔ Guides and aligns the piston pin during installation
✔ Designed for selected Porsche vehicles
✔ Suitable for Porsche 911, 996 and 986
✔ For use as Porsche 9602/2 and 00072196022
✔ Suitable for professional engine repair work

Overview:
✔ For installing the front crankshaft oil seal on Mercedes OM642 engines
✔ Centres the oil seal in the timing chain front cover
✔ Ensures straight installation at the correct depth
✔ Operated using the original crankshaft central bolt
✔ Suitable for PTFE oil seals requiring dry installation and approximately four hours of setting time
✔ For use as Mercedes 642589001400

Overview:
✔ For installing the front crankshaft radial oil seal
✔ Aligns and centres the timing cover during installation
✔ Designed for suitable Ford engines
✔ Combines two service functions in one special tool
✔ For use as 303-652

Overview:
✔ Tool set for installing the front crankshaft oil seal
✔ Suitable for BMW M47 and M57 engines
✔ Designed for damage-free installation of PTFE radial shaft seals
✔ Ensures centred and even pressing into the timing case cover
✔ Includes press sleeve, installation cone and centring device

Overview:
✔ Holds the bucket tappet in the depressed position
✔ Enables removal of valve adjustment shims
✔ Suitable for compatible Fiat, Peugeot, Hyundai, Renault and Iveco engines
✔ Applicable to Fiat Ducato 2.8 L 230 and 244 models
✔ Suitable for engine code 8140.43
✔ Used as Fiat 1860724001 and as Fiat 1860724000

Overview:
✔ Designed for installing and removing valve keepers on BMW V8 N63 engines
✔ Dual-ended tool for both removal and installation
✔ Magnetic tip for extracting valve keepers
✔ Opposite end securely holds the keepers during installation
✔ Simplifies work in the restricted space around the valve assembly
✔ Suitable for 6 mm applications

Overview:
✔ Special tool for removing and installing AMG wheel centre caps
✔ Suitable for Mercedes-Benz vehicles with threaded AMG wheel centre caps
✔ Prevents damage to expensive wheel centre covers and alloy wheels
✔ 17 mm hex drive for standard tools
✔ Manufactured from durable high-strength plastic

Overview:
✔ 2-in-1 special tool for holding the viscous fan clutch and water pump pulley
✔ Designed for BMW engines with 38 mm and 44.5 mm hole spacing
✔ Prevents pulley rotation during fan clutch removal and installation
✔ Compatible with a wide range of BMW M and S-series engines
✔ To be used as BMW 115030 and 115050

Overview:
✔ Complete tool set for removing the water pump on VAG 2.5L 5-cylinder TDI engines
✔ No timing adjustment required during water pump removal
✔ Includes crankshaft turning tool, gear puller and water pump puller bridge
✔ Manufactured to the latest OEM design version (suffix A)
✔ Forged tools with high-strength SC45 and CrV steel components
✔ Designed for use as T10221A, T10222A and T10225A

Overview:
✔ Set of 2 brake line fixing blocks for accurate tube positioning
✔ Suitable for brake lines with diameters of 4.75 mm (3/16") and 6.35 mm (1/4")
✔ Compatible with copper, steel and plastic-coated brake lines
✔ Allows the new brake line to be mounted parallel to the original line
✔ Ensures accurate duplication of the existing brake line routing
✔ Can also be used with other tubes of the same diameter

Overview:
✔ Brake bleeder adapter for brake bleeding devices
✔ Designed for selected Chrysler, Dodge, Jeep, Fiat and Lancia vehicles
✔ Suitable for brake fluid reservoirs with an internal neck diameter of Ø 30 mm
✔ Secure and reliable connection to the brake fluid reservoir
✔ Ideal for brake fluid replacement and brake bleeding
✔ Suitable for professional workshop use
✔ Compatible as Stierius 22 and ATE 03.9302-0902.2

Overview:
✔ Collection bottle for used brake fluid during brake bleeding and brake fluid replacement
✔ Capacity: 1 litre
✔ Durable plastic bottle with embossed volume scale
✔ Flexible silicone hose with 6 mm inner diameter
✔ Transparent hose allows visual inspection for air bubbles
✔ Integrated non-return valve prevents air from entering the brake system
✔ Chain holder with hook and special bracket for stable vertical positioning

Overview:
✔ Professional-quality brake pedal release tool
✔ Designed for separating the brake pedal from the brake booster connection
✔ Suitable for VW Golf 3 and VW Golf 4 models
✔ Allows repairs according to manufacturer service procedures
✔ Designed based on the original special tool
✔ Manufactured as OEM VW 3289

Overview:
✔ Professional ABS ring installation tool
✔ Enables damage-free installation of ABS sensor rings and impulse rings
✔ Suitable for installation using the axle nut or a hammer
✔ Prevents deformation and coating damage during installation
✔ Compatible with numerous Mercedes-Benz and Chrysler vehicles
✔ Reference tool as W211589006100