STAHLMAXX

Professional special tool kit for setting timing on 1.6L, 1.7L, 1.8L, 2.0L, and 2.3L DCI diesel engines with timing chain and camshaft gear drive. Compatible with Renault, Mercedes, Opel, Nissan, Fiat. Includes tools for camshaft, crankshaft, and flywheel adjustment.

3-sided socket set for Bosch VP37 and similar EDC injection pumps, designed for loosening and tightening pump cover screws.

Special locking pin for the high-pressure fuel pump on PSA and Opel 1.6 Diesel DV6 / B16 engines (from 2014 onward), ensuring safe pump maintenance.

Special tool for safely removing and centering the injection pump pulley on Ford engines. Ensures precise operation during pump service.

Special key designed for safe and precise removal and installation of diesel fuel filter elements on Ford Transit 2.2 TDCI engines. Ensures controlled handling without damaging plastic or aluminum components, ideal for workshops and fleet maintenance.

Professional tool kit for removing, installing, and compressing injector combustion chamber Teflon seals for BMW Gen 1 and Gen 2 engines. Ensures correct installation for both generations and protects sensitive components during service.

Professional removal and installation kit for Gen. 2 FSI injectors on VAG vehicles. Ensures precise and safe handling of petrol direct injection systems.

Special airbag release tool for unlocking and removing the steering wheel airbag module on Opel Insignia (from 2008) and Opel Astra J.

Overview:
✔ Special tool set for removing and installing rear axle carrier bushings
✔ Allows replacement of vertical rear subframe bushings without removing the rear axle assembly
✔ Suitable for front and rear rear-axle carrier mountings
✔ Designed for Mercedes-Benz C216, C217, W221, W222 and W240 models
✔ Reduces repair time by requiring only partial lowering of the rear axle
✔ Includes dedicated tools for front and rear mounting positions
✔ Suitable for professional workshop use

Overview:
✔ Professional clamping tool for shock absorbers with rebound / return springs
✔ Designed for pulling back and securing the shock absorber piston rod
✔ Facilitates spring installation on shock absorbers with retracting piston rods
✔ Includes protective plastic jaw inserts to prevent surface damage
✔ Helps secure the piston rod at maximum extension position
✔ Simplifies suspension strut assembly procedures
✔ Reduces installation difficulty and injury risk
✔ Suitable for professional workshop applications

Overview:
✔ Professional half-shell expansion tool for compact wheel bearing removal
✔ Specifically designed for Opel Insignia wheel bearing applications
✔ Designed for removing seized compact wheel bearing units
✔ Allows wheel bearing service directly on the vehicle in most applications
✔ Optimized load distribution for controlled removal procedures
✔ Reduces the risk of damage to tools and surrounding components
✔ Intended for use with hydraulic components and expansion systems
✔ Designed for professional workshop use

Overview:
✔ Professional pull and press spindle for hollow hydraulic cylinder systems
✔ M20 × 2.5 thread for pressing and extraction applications
✔ Short 320 mm design for compact workspaces and press frame use
✔ Manufactured from high-strength SCM440 steel
✔ Suitable for axle, wheel bearing, bushing and ball joint service work
✔ Compatible with hydraulic cylinders and press sleeve systems
✔ External hex drive for simple installation and operation
✔ Designed for professional workshop use

Overview:
✔ Professional special tool for heater blower motor removal and installation
✔ Designed for Volvo and Land Rover vehicles
✔ Enables removal of blower motors with special locking mechanisms
✔ Includes guide pin for easier installation and removal procedures
✔ Allows controlled and damage-free service work
✔ Suitable for workshop and professional repair applications

Overview:
✔ Professional SAC clutch alignment tool set for BMW transmissions
✔ Designed for precise centering of SAC clutch assemblies during installation
✔ Suitable for multiple BMW manual transmission types
✔ Ensures correct alignment between clutch disc and transmission input shaft
✔ Facilitates gearbox installation and clutch service procedures
✔ Compatible with S6S and S5D transmission series
✔ Suitable for workshop and professional automotive applications
✔ Designed for use as BMW OEM 212140, 212141 and 212142

Overview:
✔ Professional gear puller set for VAG manual transmissions
✔ Designed for removal of 5th and 6th gear wheels and synchronizer hubs
✔ Suitable for 5-speed and 6-speed gearbox repair procedures
✔ Compatible with 02S, 0A4, 02M and 02Z transmissions
✔ Suitable for Audi, Volkswagen, Seat and Skoda vehicles
✔ Includes puller shells, puller plate, spindle and retaining sleeve
✔ Used as OEM T10309A, T10309/1/2/3/4/5
✔ Ideal for gearbox overhaul and transmission service work

Overview:
✔ Professional pressure plate for transmission and suspension work
✔ Suitable as assembly aid during drivetrain and chassis repairs
✔ Designed for workshop support during gearbox installation procedures
✔ Helps stabilize and position components during service work
✔ Suitable for professional transmission and suspension applications
✔ Durable workshop construction
✔ Precision-manufactured for reliable fitment
✔ To be used as VW 402

Overview:
✔ Professional tensioner pulley wrench for PSA vehicles
✔ Designed for adjusting timing belt tensioner pulleys
✔ 7 mm diameter for precise fitment
✔ Suitable for timing belt service procedures
✔ Precision-fit construction for secure operation
✔ Suitable for professional workshop applications

Overview:
✔ Flywheel holding tool with base support
✔ Designed for secure fixation of flywheel during service
✔ Prevents rotation during loosening and tightening operations
✔ Suitable for Opel, Chevrolet and Saab vehicles
✔ Compatible with multiple petrol engine codes
✔ Stable positioning thanks to integrated base design
✔ Ideal for clutch and engine repair applications
✔ To be used as EN-43653, J43653