STAHLMAXX

6-piece M12x1.5 sealing kit for reliable diagnostics of common rail injectors. Protects connections from contamination and corrosion while identifying leaking injectors during pressure testing.

Professional tool kit for precise positioning of the pump injector unit and installation of O-rings. Compatible with specific VW and Audi models and 4-, 5-, and 10-cylinder diesel engines. Includes templates and brass mounting sleeves for accurate assembly.

5-pack cotton brushes for precise cleaning of injector bores and engine cavities. Ø10x35 mm brush heads with 250 mm length ensure thorough removal of dirt, carbon deposits, and residue before installing new injectors.

Compact slide hammer with M8x1.25 thread for injector removal. Equivalent to VW T10133/3, T10055.

Professional 27 mm injector socket with 1/2" drive for Siemens injectors on 2.0L DW10 HDi diesel engines used in PSA vehicles including Citroën and Peugeot.

Overview:
✔ Professional tool set for removing and installing rear axle integral link silent bushes and ball joint bushes
✔ Suitable for various BMW 5 Series, 6 Series, 7 Series, X5 and Z8 models
✔ Designed for servicing worn, noisy or seized rear axle bushes
✔ Precision-manufactured components ensure accurate fitment and safe operation
✔ Hardened and blackened steel construction for long service life
✔ Used as BMW 334190 / 33 4 190
✔ Includes spindle, removal sleeve, support plate and installation/removal adapters

Overview:
✔ Professional special insert set for strut and shock absorber service
✔ Designed for Audi, VW Passat and Mercedes applications
✔ Suitable for loosening and tightening shock absorber retaining nuts
✔ Intended for work on strut mounts and upper shock mounts
✔ Supports secure counter-holding during repairs
✔ Multiple bore sizes for broader vehicle compatibility
✔ Precision-machined for accurate fitment
✔ Professional workshop-quality construction

Overview:
✔ Replacement and expansion component set for 92 mm compact wheel bearing applications
✔ Suitable for PSA, Citroën, Peugeot, Opel, Fiat and Toyota vehicles
✔ Designed for installation and removal of compact wheel bearing units Ø92 mm
✔ Intended for use with hydraulic components and existing tool systems
✔ Suitable as replacement or expansion for existing wheel bearing tool kits
✔ Precision-designed half-shell system for secure positioning
✔ Designed for professional workshop use
✔ Cannot be used as a standalone tool set

Overview:
✔ Professional pull spindle for hollow hydraulic cylinder systems
✔ M16 × 2.0 pull thread for pulling and extraction applications
✔ Compatible with hollow hydraulic cylinders using M20 × 2.5 connection thread
✔ Heavy-duty construction for high load applications
✔ Maximum load capacity up to 13 tons
✔ Suitable for bearing, bushing, hub and suspension service work
✔ Designed for professional workshop use
✔ Suitable for hydraulic pulling systems and tool sets

Overview:
✔ Professional support stand for DSG, S-Tronic, Multitronic, and CVT transmissions
✔ Designed for clutch unit and input shaft package measurement procedures
✔ Prevents damage to sensitive oil pipes during servicing
✔ Suitable for Audi transmission repair and assembly work
✔ Supports professional measurement according to repair guidelines
✔ Improved handling during transmission service operations
✔ Suitable for multiple VAG transmission variants
✔ item no. compatible reference: as T40099

Overview:
✔ Special tool set for mechatronic removal and installation
✔ Designed for BMW GA8HP45Z automatic transmissions
✔ Suitable for professional transmission repair and servicing
✔ Includes fixing pins for mechatronic installation
✔ Includes sealing caps for transmission connector guide sleeve
✔ Suitable for vehicles with start/stop systems
✔ Used as BMW 242390 and 241430
✔ Supplied in workshop storage case

Overview:
✔ Professional adjustment gauge for VAG 6-speed manual gearboxes
✔ Designed for precise shift linkage adjustment procedures
✔ Suitable for 0A5 manual transmission systems
✔ Ensures accurate gear selector alignment
✔ Compatible with VW Transporter models from 2004 onwards
✔ Required for professional gearbox servicing and adjustment
✔ Used as VAG T10216
✔ Compatible with additional VAG alignment tools

Overview:
✔ Professional seal installer tool for BMW rear differentials
✔ Designed for radial shaft seal installation on differential input shafts
✔ Ensures correct installation depth and precise seal positioning
✔ Suitable for BMW rear differential types 168AL and 168LW
✔ Reinforced design allows direct use with rubber or plastic hammer
✔ Prevents premature seal failure during installation
✔ Used as BMW 333390 and 0493172
✔ Suitable for professional workshop use

Overview:
✔ Crankshaft locking pin for Jaguar and Land Rover engines
✔ Suitable for 3.0L V6 and 5.0L V8 engines (from 2013)
✔ Compatible with engine codes AJ126, AJ133, 306PS, 508PS, 508PN
✔ Used for precise crankshaft alignment at TDC
✔ Inserted via crankshaft sensor opening
✔ Compatible with OEM reference JLR-303-1303

Overview:
✔ Professional timing tool set for Land Rover 4.4D / 448DT diesel engines
✔ Suitable for Range Rover and Range Rover Sport (2011–2019)
✔ Designed for timing chain service and injection pump alignment
✔ Ensures precise camshaft and crankshaft positioning
✔ Includes tools for updated crankshaft locking systems
✔ Ideal for engine repair and professional workshop use

Overview:
✔ Camshaft alignment tool for timing adjustment
✔ Designed for Renault and Nissan 1.4 / 1.6 / 1.8 / 2.0 16V engines
✔ Ensures precise camshaft positioning during service
✔ Essential for timing belt and engine repair procedures
✔ Compatible with OEM reference MOT1496 / MOT.1496
✔ Suitable for professional workshop use

Overview:
✔ Camshaft setting gauge for Porsche engines
✔ Designed for checking and adjusting camshaft position
✔ Ensures precise timing verification and adjustment
✔ Suitable for Porsche 996, 997, Boxster and Cayman
✔ Essential for engine setup and timing work
✔ To be used as 9686 / 00072196860

Overview:
✔ Camshaft locking tool for Porsche 993 engines
✔ Designed for precise camshaft immobilization
✔ Suitable for multiple M64 engine variants
✔ Ensures correct positioning during timing procedures
✔ Recommended with mounting set item.no. 116566A