Clutch Alignment Tool for 5 & 6-Speed Transmissions – as VAG T10097
-
Code:117191
-
Weight:0.530 Kgs
Overview:
✔ Professional clutch alignment tool for accurate clutch disc centering
✔ Suitable for 5-speed and 6-speed manual transmissions
✔ Ensures precise alignment between clutch disc, flywheel and crankshaft
✔ Facilitates easier gearbox installation during clutch replacement
✔ Helps prevent clutch judder and vibration caused by incorrect centering
✔ Compatible with selected VW, Audi, Seat and Skoda vehicles
✔ Suitable for transmission types 02M, 02N and 02Y
✔ Designed for use as VAG T10097
This clutch alignment tool is designed for precise centering of the clutch disc relative to the flywheel and crankshaft during clutch installation and gearbox service procedures.
Correct alignment simplifies reinstallation of the gearbox and helps prevent clutch judder, vibration and uneven clutch engagement caused by improper clutch disc positioning.
The tool is suitable for many VW, Audi, Seat and Skoda models equipped with 5-speed and 6-speed manual gearboxes.
Function
✔ Accurately centers clutch disc during installation
✔ Facilitates transmission reinstallation
✔ Reduces risk of clutch vibration and uneven engagement
✔ Supports professional clutch replacement procedures
✔ Suitable for workshop and professional automotive applications
Compatibility
Suitable for selected VW, Audi, Seat and Skoda vehicles equipped with:
- 5-speed manual transmission
- 6-speed manual transmission
- Transmission types: 02M, 02N, 02Y
Important Note
This alignment tool is intended for clutch installation on crankshafts with a large centering diameter or without needle bearing.
If the vehicle configuration differs, the clutch alignment tool Item No. 123982 (as VW3176) should be used instead.
According to OE repair manuals, the distinction is not always clearly specified.
Reference Number
Designed for use as:
- VAG T10097
Recommended Torque Specifications
To prevent distortion of the pressure plate, it is recommended to loosen and tighten the clutch pressure plate bolts evenly in 90-degree steps.
Pressure Plate Torque Specifications for Dual Mass Flywheel
- M6 bolts: 13 Nm
- M7 bolts: 20 Nm
- M8 bolts: 22 Nm
Always follow the vehicle manufacturer's torque specifications.
Original numbers are provided for comparison purposes only. This is not an OEM tool.