Flywheel Locking Tool for Opel 2.0 CDTi (Manual Transmission) – as EN-50432

Specialized tool for securely holding and locking the crankshaft via the flywheel during engine service procedures on Opel 2.0 CDTi engines with manual transmission.

Function

The tool locks the flywheel to prevent crankshaft rotation, allowing safe and controlled work when loosening or tightening fasteners.

It is specifically designed for vehicles with manual transmission, where standard counter-holding tools for automatic transmissions are not suitable.

Installation & Procedure

The tool is mounted through the starter motor opening:

• Remove the starter motor
• Disconnect the crankshaft sensor connector
• Insert the locking tool into the starter opening
• Secure it using a fastening bolt
• Ensure correct alignment of the vibration damper locating pin and mark its position

Torque Reference

Example specification (reference: Opel Insignia A 2.0 CDTi, B20DTH):

• Crankshaft pulley bolts: 20 Nm + 90°

Engine Compatibility

Suitable for the following engine codes:

B20DTH, B20DTR, B20DTJ, D20DTH, D20DTR, D20DTJ

Reference

To be used as EN-50432.

Original numbers are for comparison purposes only. This is not an original manufacturer tool.