BGS Technic

Overview:
✔ 3-in-1 design: lying mat, kneeling pad and seat block
✔ Suitable for regular work on hard and uncomfortable surfaces
✔ 3-layer foam construction with shock-absorbing and insulating properties
✔ Non-slip surface helps keep the mat securely in place
✔ Moisture- and dirt-resistant
✔ Compact foldable design for easy storage
✔ Integrated carrying grip
✔ Unfolded size: 1200 x 420 x 30 mm

Overview:
✔ Makes vehicle manoeuvring easier in confined spaces
✔ Ideal for showrooms, workshops and towing companies
✔ Load capacity: 600 kg per jack
✔ Suitable for tyres up to 330 mm wide
✔ Minimum clearance: 160 mm
✔ Adjustable roller distance: 360–660 mm
✔ Compact design for precise vehicle positioning

Overview:
✔ Compact one-hand grease gun for precise lubrication and maintenance work
✔ Suitable for impact mechanisms, spindles and other components with grease fittings
✔ Push-button operation with return spring for accurate grease dosing
✔ Easy filling with bulk grease
✔ Includes 3 interchangeable nozzles: 0.7 / 1.0 / 1.4 mm
✔ Maximum pressure: 69 bar (1000 PSI)
✔ Grease capacity: 85 cm³
✔ Low operating force for comfortable one-hand use

Overview:
✔ Protective covers for the seat, steering wheel and gear knob
✔ Protects against grease, oil, water, food residue and other contaminants
✔ Made from lightweight, durable polyester
✔ Cleans with a damp cloth or sponge
✔ Universal fit

Overview:
✔ 15 m retractable cable and 1 m supply lead
✔ Automatic retraction stop, released by a short pull on the cable
✔ Housing swivels sideways
✔ Includes a bracket for wall mounting
✔ Conductor configuration of 3 × 1.5 mm²
✔ Suitable for 230 V, with IP20 protection

Overview:
✔ For supporting vehicle glass during adhesive removal, bonding preparation and cleaning
✔ Suitable for windscreens, rear windows and side windows
✔ Four suction pads, each 130 mm in diameter
✔ Support point spacing of 710 × 620 mm
✔ Folding construction for compact storage
✔ Working height of 950 mm

Overview:
✔ 70 L tank for collecting waste oil by gravity
✔ Compressed-air emptying at a discharge pressure of 0.5 bar
✔ Height-adjustable collection funnel and handle
✔ 400 mm collection funnel with strainer
✔ Tank level indicator for monitoring the collected volume
✔ Four ball-bearing wheels, including two swivel castors
✔ Additional tank connection for optional accessories

Overview:
✔ Maximum load capacity of 2000 kg per pair
✔ Adjustable support height from 268 to 418 mm
✔ Ten height positions
✔ Four support legs with reinforced foot plates on each stand
✔ Saddles with rubber pads
✔ Supplied and sold only as a pair

Overview:
✔ Pair of ramps with drive-on heights of 40, 70 and 100 mm
✔ Suitable for a vehicle’s front or rear wheels
✔ Maximum load capacity of 3.5 t; use only as a pair
✔ For tyres up to 210 mm wide
✔ Robust polypropylene construction

Overview:
✔ Four modes: front light, main light, red main light and flashing red light
✔ Stepless dimming for the front, white main and red main lights
✔ Adjustable flash frequency in red flashing mode
✔ 500 lm COB main light and 170 lm SMD front light
✔ Magnets, rotating hook and 1/4″ tripod thread for flexible positioning
✔ 2000 mAh battery with charge indicator and USB-A phone charging output

Overview:
✔ Broad illumination from a 3 W COB LED
✔ Brightness: 120 lm
✔ Lamp angle adjustable through 60°
✔ Fits head circumferences of 50–70 cm
✔ Powered by 3 × 1.5 V AAA batteries

Overview:
✔ Side COB-LED work light and SMD-LED spotlight at the tip
✔ Main light: 100 lm for up to 5 hours or 300 lm for up to 2 hours
✔ Spotlight: 100 lm for up to 2.5 hours
✔ Magnetic base and rear, with a pocket or belt clip
✔ Rechargeable 750 mAh Li-ion battery with charge status indicator

Overview:
✔ Two independently adjustable SMD LED floodlights
✔ Three light-output levels: 500, 1,500 and 5,000 lm
✔ Colour temperature range: 4,000–7,000 K
✔ Hybrid operation from the rechargeable battery or mains supply
✔ Height-adjustable tripod with carrying handle
✔ Individually adjustable lamp heads and beam angles
✔ 4 Ah, 7.4 V lithium-ion battery
✔ Operating time: approximately 1–5 hours
✔ Suitable for indoor and outdoor use
✔ IP54 protection and IK07 impact resistance

Overview:
✔ Supports engines and gearboxes during removal and installation
✔ Enables front-axle removal without removing the complete powertrain
✔ Suitable for front- and rear-wheel-drive vehicles
✔ Supports gearbox repairs and clutch replacement on front-wheel-drive vehicles
✔ Adjustable width: 750–1,450 mm
✔ Maximum load capacity: 500 kg
✔ Stable square steel-tube construction
✔ M20 × 2.5 threaded support hooks
✔ Rubber protectors safeguard the wing edges
✔ Includes two 900 mm support chains

Overview:
✔ Designed for precision work on electronic components and wiring
✔ Cuts flexible and solid cables accurately
✔ Suitable for copper cables up to 1.5 mm²
✔ Compact 115 mm design for controlled handling
✔ Two-component handles

Overview:
✔ 2-in-1 tool for stripping wires and removing outer cable sheathing
✔ Suitable for wire diameters from 0.2–0.8 mm
✔ Precision blade for solid and flexible conductors
✔ Clearly readable size markings
✔ Spring-loaded, self-opening mechanism
✔ Compact design with storage lock
✔ Includes two replacement blades
✔ Total length: 115 mm

Overview:
✔ 220-piece set for repairing existing wiring and installing new wiring
✔ Quick-change ratcheting crimping tool with aluminium construction
✔ H6 and H7 crimping dies for cable sizes from 0.35 to 3 mm²
✔ Includes cable seals and male and female connector terminals
✔ Includes 1-pin, 2-pin, 3-pin and 4-pin connector housings
✔ Terminal release tool for removing contacts from housings
✔ Components for assembling waterproof electrical connectors

Overview:
✔ Extra-wide field of vision
✔ Transparent lenses made from impact-resistant polycarbonate
✔ Optimised coverage around the eyes
✔ Adjustable and flexible arms
✔ Comfortable and secure fit
✔ Suitable for gardening, drilling and grinding work
✔ For use when working with metal, stone, concrete and wood