BGS Technic

Professional extraction claw for safe removal of stuck injectors on Mercedes CDI engines, allowing the injector to be reused. Designed for use with demolition hammers (not included).

Professional 300 mm bench sheet metal shear for precise cutting of steel up to 1.2 mm and stainless steel up to 0.7 mm. Durable construction with spring mechanism and ergonomic non-slip handles.

High-quality replacement cutting wheel for pipe cutters with integrated deburrer. Fits 3–35 mm diameter pipes. Restores cutting performance and ensures clean, precise cuts in copper, aluminum, and thin-walled steel pipes.

This exhaust pipe cutter with ratchet is a high-precision tool for fast, controlled cutting of pipes with diameters between 28 and 67 mm. Its 60-tooth ratchet mechanism with 6° return angle ensures smooth, precise movement, even in tight spaces. Suitable for steel, stainless steel, and other materials, it provides clean, deformation-free cuts up to 3 mm deep.

Overview:
✔ Special puller for easy and controlled removal of VAG ignition coils
✔ Reduces the risk of damage to the coil housing and surrounding components
✔ Suitable for selected 1.0, 1.2 and 1.4 TSI/TFSI engines
✔ Also suitable for selected 2.0 GTI engines
✔ Compatible with Volkswagen, Audi, SEAT and Skoda models
✔ Covers a wide range of VAG engine codes
✔ Suitable for professional workshop use

Overview:
✔ 75 L tank capacity
✔ For cleaning small automotive, workshop and industrial parts
✔ Suitable for mildly alkaline, water-soluble cleaning agents
✔ Robust powder-coated sheet-steel construction
✔ Mobile design with four Ø 100 mm casters
✔ Protective lid, storage shelf and illuminated on/off switch

Overview:
✔ Designed for damage-free crankshaft pulley removal
✔ Two-arm and three-arm configurations
✔ Suitable for pulleys with 3, 4, 5 or 6 mounting holes
✔ Compatible with bolt circles from Ø48 to 114 mm
✔ Suitable for many vehicles, including VW T4 and Audi A3
✔ M8 and M10 puller bolts included

Overview:
✔ For installing and removing stretch-fit ribbed belts
✔ Designed for belt drives without a conventional tensioner pulley
✔ Universal application for numerous engines
✔ Suitable for most common pulley sizes
✔ Facilitates controlled belt installation and removal
✔ Includes one removal tool and four installation tools

Overview:
✔ For twisting off electrical terminals and electrodes from damaged glow plugs
✔ Designed for use with item no. 8297
✔ Six sizes from 2.6 to 8.25 mm
✔ Uniform 6.3 mm (1/4") internal square drive
✔ Supports the preparation of broken glow plugs for drilling and extraction
✔ Suitable for professional glow plug repair work

Overview:
✔ Special socket set for glow plugs with permanently attached connection cables
✔ Slotted design allows the cable to pass through the socket
✔ Suitable for newer Fiat, Alfa Romeo and Lancia models
✔ Includes socket sizes 8, 9 and 10 mm
✔ External hex drive for use with a suitable wrench or socket
✔ Supports controlled removal without damaging the connection cable

Overview:
✔ Replacement stones for honing tool item no. 1157
✔ K280 grit for fine surface finishing
✔ Stone length: 75 mm
✔ Supplied with retaining pins
✔ Set of three replacement stones

Overview:
✔ Special tool set for aligning the cylinder head gasket and cylinder head
✔ Suitable for Volkswagen, Audi, SEAT and Škoda vehicles
✔ Can also be used universally on many other engines
✔ Replaces locating sleeves and pins omitted from many VAG engines
✔ Prevents incorrect alignment and damage to the cylinder head gasket
✔ Includes M9 and M10 guide pins plus two removal tools

Overview:
✔ Designed for depressing bucket tappets during valve clearance adjustment
✔ Enables removal of valve adjustment shims
✔ Suitable for various European OHC engines
✔ Compatible with selected Opel, Volvo, Citroën, Peugeot and Renault applications
✔ Suitable for Opel 15DT, X17DT, X17DTH and Z17DTH engines
✔ Used as KM-6090, as 0132-AF and as Volvo 9995022

Overview:
✔ Rubber adapter for compatible valve lapping tools
✔ Diameter: 45 mm
✔ Provides secure contact with the valve head during lapping
✔ Suitable as a replacement or supplementary adapter

Overview:
✔ Designed specifically for OHC engines
✔ Particularly suitable for Toyota applications
✔ Adjustable clamping range: 72–240 mm
✔ Manufactured from pressed steel
✔ Robust construction for controlled valve spring compression

Overview:
✔ Extra-narrow gripping profile for adhesive wheel weights
✔ Designed for loosening and removing bonded balancing weights
✔ Plastic-protected hammer head for tapping weights into position
✔ Protective plastic cap helps prevent damage to alloy wheels
✔ Two-stage adjustment for narrow and wide adhesive weights
✔ Insulated, self-opening handles with internal spring
✔ Overall length: 225 mm

Overview:
✔ Designed for passenger car tyre valves
✔ Suitable for removing valve cores
✔ Restores damaged tyre valve threads
✔ Combines two functions in one compact tool

Overview:
✔ Enables fast and easy removal of truck tyres
✔ Suitable for almost all 20″, 22.5″ and 24.5″ truck tyres
✔ For tubed and tubeless tyres up to 330 mm wide
✔ Removes the tyre without lifting the complete wheel
✔ Ergonomic steel tube with a non-slip handle
✔ Aluminium support for Super Single and Super Wide tyres
✔ Equipped with two heavy-duty nylon rollers