BGS Technic

Overview:
✔ Extra deep hex socket set for nuts on long threaded studs
✔ Ideal for bumper, tail light and door hinge fasteners
✔ Suitable for parking brake cable adjusters on various vehicle brands
✔ Provides improved access to recessed fasteners
✔ Designed for professional automotive repair and maintenance
✔ Covers sizes from 8 mm to 14 mm

Overview:
✔ For pressing drive shafts out of wheel hubs
✔ Particularly suitable for seized, bonded or corroded drive shafts
✔ Hydraulic operation for high and consistent force application
✔ For 4- and 5-hole hubs with 95–125 mm bolt circle
✔ Suitable for wheel bolts up to M14
✔ Includes robust slide hammer system for hub removal and pulling work
✔ Designed for regular professional workshop use
✔ Supplied in a plastic storage case

Overview:
✔ Designed for installing wheel bearing hub units with diameters of 62 mm, 66 mm and 72 mm
✔ Suitable for selected Audi, Volkswagen, SEAT and Škoda vehicles
✔ Allows wheel bearing installation directly on the vehicle
✔ Reduces labour time during wheel bearing replacement
✔ Simple and safe operation
✔ Can also be used with a workshop press
✔ Professional tool kit for wheel bearing service applications

Overview:
✔ Suitable for passenger cars, light commercial vehicles and off-road vehicles
✔ Designed for use with impact wrenches
✔ Heavy-duty construction for long service life
✔ Hardened pressure spindle with centering tip
✔ Support fork opening of 39 mm
✔ Maximum separation range of 94 mm
✔ 26 mm hex drive for high-torque applications

Overview:
✔ Hydraulic and mechanical ball joint separator set for professional use
✔ Suitable for stabilizer joints, ball joints and tie rod ends
✔ Compatible with a wide range of passenger cars and vans
✔ Includes forged separator forks in 30 mm, 34 mm and 40 mm sizes
✔ Maximum opening range up to 95 mm in hydraulic mode
✔ Suitable for removing ball joints, bearings and bushings

Overview:
✔ Heavy-duty impact socket with 46 mm 12-point profile
✔ Suitable for use with impact wrenches and hand tools
✔ Manufactured from durable Chrome Molybdenum steel
✔ Deep internal design with 68 mm internal depth
✔ 1/2" (12.5 mm) drive connection
✔ Designed for professional workshop applications

Overview:
✔ Professional 26-piece puller and press sleeve set for wheel bearings and suspension bushings
✔ Suitable for installation and removal of wheel bearings, hydraulic bushings, rubber bushings, and silent blocks
✔ Compatible with spindle-driven tools and hydraulic workshop presses
✔ Helps reduce the risk of damage to bearings and housings
✔ Includes 20 press sleeves from 44 mm to 82 mm
✔ Supplied with 4 pressure spindles in different thread sizes
✔ Suitable for passenger cars, SUVs, vans, and light commercial vehicles

Overview:
✔ Designed for removal and installation of the large rear bush in the front lower control arm
✔ Suitable for Ford Transit models from 2000 to 2013
✔ Compatible with OEM bush references 4042024, 4372132, 4540787 and 7372131
✔ Can be used with a press frame or workshop hydraulic press
✔ Ensures precise and safe bush replacement
✔ Suitable for professional workshop use

Overview:
✔ 15-piece measuring accessory set for multimeters and other test equipment
✔ Suitable for devices with 4 mm sockets
✔ Designed for electronics testing and automotive electrical diagnostics
✔ Enables measurements on connectors and sockets with limited access
✔ Includes test LEDs, crocodile clips, test probes, needle probes, piercing clamp and 940 mm test leads

Overview:
✔ Replacement reflector strip for Item No. 2188
✔ Designed for precise fit and compatibility
✔ Suitable for replacing worn or damaged reflector strips
✔ Durable construction for long-term use
✔ Quick and easy installation
✔ Designed for workshop and professional use

Overview:
✔ Professional digital infrared laser thermometer for non-contact temperature measurement
✔ Temperature range: -50°C to +500°C (-58°F to +932°F)
✔ Suitable for cold and high-temperature measurements
✔ Fast measuring time of approximately 1 second
✔ Measurement accuracy: ±1.5%
✔ Distance-to-spot ratio (D/S): 12:1
✔ Switchable between °C and °F
✔ Suitable for automotive, industrial and HVAC applications

Overview:
✔ Professional pressure tester kit for automatic transmission diagnostics
✔ Enables fast diagnosis of transmission mechanical faults through oil pressure testing
✔ Long test hoses allow testing directly from the driver’s seat during operation
✔ Includes low and high-pressure gauges for transmission diagnostics
✔ Supplied with multiple adapters for various transmission systems
✔ Compatible with numerous VW, Audi, BMW, Mercedes-Benz, Ford, GM, Chrysler, Toyota, Volvo and ZF transmissions
✔ Suitable for workshop diagnostics and transmission service work

Overview:
✔ Professional locking tool for twin camshaft engines
✔ Suitable for petrol and diesel engines
✔ Designed for camshaft and injection pump gear alignment
✔ Compatible with timing gear spacing from approx. 13–180 mm
✔ Supports accurate timing belt positioning relative to the crankshaft
✔ Adjustable design for versatile engine applications
✔ Suitable for professional workshop applications

Overview:
✔ Professional timing tool kit for Opel 1.0 / 1.2 / 1.4 petrol engines
✔ Suitable for older Opel models (1997–2007)
✔ Designed for timing chain adjustment and repair
✔ Includes camshaft and crankshaft locking tools
✔ Covers multiple engine codes across Opel models
✔ Supplied in practical storage case

Specialized pliers for safe disconnection of fuel lines with quick couplings. Ideal for fuel filter service, tank venting, and modern fuel systems maintenance.

Special tool set for safe removal and installation of diesel fuel filters on Opel and Fiat vehicles. Prevents damage to the filter housing and ensures precise service.

Professional special tool for safe and precise installation of injector pipe sealing rings on 1.6L 16V PSA diesel engines. Designed to prevent deformation and damage during assembly. Compatible with multiple PSA, Volvo, Ford, Mazda, Suzuki, and Fiat models.

Professional special wrench designed for safe removal and installation of BMW diesel injection lines on injectors and other pipe fittings, ensuring precise handling and minimal risk of damage.