Guide Sleeve for Rear Crankshaft Oil Seal on VAG Engines, as T10122/2
Price:
€33.50
65.52лв.33.50EUR
Code:
117751
Weight:
0.200Kgs
Overview:
✔ Guide sleeve for centring and positioning the rear crankshaft oil seal
✔ Suitable for selected VAG 3.0L TFSI, 3.2L FSI and 4.2L FSI engines
✔ Designed for controlled installation of PTFE oil seals
✔ Ensures accurate alignment before the seal is pressed into position
✔ Helps prevent the sealing lip from folding and causing oil leakage
✔ For use as VAG T10122/2
Special guide sleeve for centring and positioning the flywheel-side crankshaft oil seal on selected VAG engines.
Before installation, the PTFE oil seal is expanded using installation aid item no. 117750, as T10122/1, and then pushed onto this guide sleeve.
Installing the Crankshaft Oil Seal
The crankshaft oil seal is pressed to the precisely specified installation depth using press sleeve item no. 117752, as T10122/3.
The guide sleeve keeps the oil seal correctly aligned on the crankshaft while it is positioned and pressed into place.
Preventing Damage and Oil Leakage
There is a risk of damaging the oil seal if its sealing lip folds over during installation. An incorrectly positioned sealing lip can cause subsequent oil leakage.
After installation, check that the oil seal and its sealing lip are seated correctly.
For removal, we recommend puller hooks item no. 116542, for use as T20143.