STAHLMAXX

Professional timing and engine service tool kit for Ford, Fiat, PSA, Land Rover, and Jaguar 2.0–3.2 D Puma diesel engines. Includes crankshaft, camshaft, and tensioner locking tools in a durable storage case.

Special puller for removing high-pressure fuel pump pulleys on VAG 1.4L, 1.6L, and 2.0L TDI engines. Compatible with OEM T10489.

Professional diagnostic tool for accurate testing of Common Rail high-pressure pumps and injectors. Enables direct physical pressure measurement up to 2000 bar for diagnosing start pressure, operating pressure, maximum pressure, and system leaks in modern diesel engines.

High-quality injector socket designed for safe and efficient removal of injector retaining rings. Ideal for Bosch injectors in Mercedes CDI and PSA HDI engines.

Professional 6 kg slide hammer with 900 mm total length and M18 x 1.5 thread, designed for heavy-duty removal of hubs, injectors and seized components.

Overview:
✔ Angled brake bleeder adapter with adjustable bayonet locking system
✔ Suitable for bayonet brake fluid reservoirs with inner neck diameters of 32–35 mm
✔ Long, freely rotatable adapter hose for confined engine compartments
✔ Adjustable sealing ring for secure and leak-free sealing
✔ Equipped with DN 7.2 quick coupling connection
✔ Suitable for use with brake bleeding devices
✔ Compatible as Stierius No. 61A and Ate 03.9302-0923.2, 3-0049

Overview:
✔ Professional press tool set for rear subframe bushings
✔ Designed for BMW 3 Series E46 and Z4 E85
✔ Enables rear axle bushing replacement directly on the vehicle
✔ No rear axle removal required
✔ Suitable for removal and installation of rear axle carrier bushings
✔ Requires base tool Item no. 106605
✔ Allows controlled and damage-free bushing service
✔ Suitable for professional suspension repair work

Overview:
✔ Professional 22 mm special socket insert for VAG applications
✔ Designed for shock absorber removal and installation
✔ Suitable for service work in the engine compartment
✔ Can be used for tensioner pulley applications
✔ Supports controlled and professional repair procedures
✔ Precision-machined for accurate fitment
✔ Suitable for workshop use
✔ Heavy-duty construction for long service life

Overview:
✔ Professional special tool for heater blower motor removal and installation
✔ Designed for Volvo and Land Rover vehicles
✔ Enables removal of blower motors with special locking mechanisms
✔ Includes guide pin for easier installation and removal procedures
✔ Allows controlled and damage-free service work
✔ Suitable for workshop and professional repair applications

Overview:
✔ Professional alignment tool for dual clutch transmission clutch packs
✔ Suitable for Ford and Volvo vehicles with MPS6 / 6DCT450 gearboxes
✔ Designed for aligning clutch pack retaining claws
✔ Supports precise clutch installation and assembly procedures
✔ Suitable for 6-speed automatic dual clutch transmissions
✔ Intended for professional transmission repair work
✔ Helps ensure correct clutch pack positioning before torque tightening
✔ item no. compatible references: as Ford 308-757 / Volvo 9997368

Overview:
✔ Professional engine support fixture for VW T4 transmission removal
✔ Suitable for VW T4 models with standard front end up to model year 1995
✔ Allows engine movement in all directions during gearbox removal
✔ Designed for 4-cylinder and 5-cylinder engines
✔ Simplifies removal and installation of engine and gearbox mounts
✔ Essential for clutch replacement and transmission service work
✔ Allows transmission removal without releasing torsion bars
✔ Used as VW 3184, 3227 and 3230
✔ Includes support blocks, cross member and mounting wedges

Overview:
✔ Professional holding tool for BMW differential and transfer case locknuts
✔ Designed for loosening and tightening insert locknuts on driveshafts
✔ Essential for separating the propshaft from the transfer case
✔ 50 mm wrench size with integrated 1/2" drive
✔ Compatible with BMW AWD and X-Drive systems
✔ Suitable for multiple BMW differential and transfer case types
✔ Used as BMW 335040 and 330080
✔ Suitable for professional workshop use

Overview:
✔ Professional timing belt inspection and wear measuring tool
✔ Designed for PSA, Opel and Toyota wet belt engines
✔ Measures timing belt width to determine wear condition
✔ Suitable for oil-immersed timing belts
✔ Enables quick assessment of belt replacement necessity
✔ Compatible with numerous 1.0L and 1.2L engine variants
✔ To be used as PSA 1643190080 / G-0109-6 and Opel EN-52809

Overview:
✔ Special tool for turning and counter-holding the crankshaft
✔ Mounted using the crankshaft central bolt
✔ Holds securely against the crankshaft pin/key
✔ For Opel 1.5 CRDi and 2.0 CDTi engines
✔ Suitable for Astra K, Crossland P17, Insignia B and Mokka
✔ For engine codes D15DVC, D15DVH, F15DVC, F15DVH, LXD, F20DVH and LSQ
✔ To be used as EN-52783

Overview:
✔ Camshaft locking tool for Porsche engines
✔ Designed to secure camshafts during engine repair
✔ Ensures precise timing alignment and positioning
✔ Suitable for multiple M96 and M97 engine codes
✔ Essential for timing and engine service work
✔ To be used as 9612 / 00072196120 / P253

Overview:
✔ Crankshaft locking pin for TDC positioning and timing alignment
✔ Designed for Renault K9K diesel engine family
✔ Also compatible with Nissan, Suzuki and Mercedes OM607 / OM608
✔ Ensures precise crankshaft positioning during timing procedures
✔ Suitable for professional workshop use

Overview:
✔ Tool for rotating and counterholding crankshaft
✔ Suitable for loosening harmonic balancer bolts
✔ Compatible with Mercedes M139, M254, M256, M274, OM654, OM656
✔ Enables controlled engine rotation during service
✔ Can be used with extension if required
✔ Can be used as Mercedes tool as W654589004000

Overview:
✔ Tool for holding timing chain on camshaft sprocket
✔ Required for timing chain replacement and riveting
✔ Suitable for Mercedes M266 engines (1.5L / 1.7L / 2.0L)
✔ Prevents chain slipping and timing misalignment
✔ Made from aluminium for improved durability vs OE plastic
✔ Can be used as Mercedes tool as W266589004000