STAHLMAXX

Overview:
✔ Special tool for hydraulic serpentine belt tensioners
✔ Prevents damage to the tensioner damper during operation
✔ Suitable for vehicles with air conditioning and/or start-stop system
✔ For Mercedes A-Class W169 and B-Class W245
✔ Enables slow, controlled tensioning over more than 20 seconds
✔ For use as Mercedes W266589003100

Overview:
✔ Tool set for installing front PTFE crankshaft oil seals
✔ Suitable for Ford EcoBoost and VAG MPI, TSI and TFSI engines
✔ Compatible with 1.0L, 1.2L, 1.3L, 1.4L and 1.5L engines
✔ Ensures centred and controlled installation using the original mounting bolt
✔ Includes installation sleeve, guide sleeve and fitting sleeve
✔ To be used as VAG T10485 and Ford 303-1721

Overview:
✔ Adapter plate for installing the front crankshaft oil seal
✔ Suitable for BMW S55 engines
✔ Used with the installation sleeve from tool set Item no. 117411
✔ Designed for PTFE radial shaft seals measuring 65 x 79 x 10 mm
✔ To be used as BMW 83302303795 and 2303795

Overview:
✔ Extra-long T60TX socket for cylinder head bolts
✔ Suitable for selected Ford and BMW engines
✔ 205 mm length for access to deeply positioned bolts
✔ 12.5 mm square drive
✔ Suitable for BMW B36, B38, B46, B48, B58, N52 and N53 engines
✔ For loosening and tightening cylinder head bolts with a T60 Torx profile

Overview:
✔ Holding tool for removing and installing viscous fan clutches
✔ Suitable for a wide range of Mercedes-Benz models and engines
✔ Ideal for timing chain, serpentine belt and water pump service
✔ Prevents the fan clutch from rotating during removal and installation
✔ Recommended for professional workshop use
✔ Designed for use as Mercedes-Benz W113589004000

Overview:
✔ Brake bleeder adapter with bayonet locking system
✔ Designed for Kia and Hyundai passenger vehicles
✔ Side hose connection for restricted working areas
✔ Ideal for brake fluid reservoirs with limited access
✔ Fast and secure attachment with bayonet fitting
✔ Suitable for selected Hyundai and Kia models
✔ Compatible as Stierius No. 90 and Ate 03.9302-0943.2

Overview:
✔ Removes and installs tie rods without removing the tie rod end
✔ Suitable for tie rods and axial joints with diameters from 33–42 mm
✔ Open design allows quick installation directly onto the tie rod
✔ Operates with any 1/2" extension outside the wheel arch
✔ Eliminates the need to remove the lock nut and tie rod end
✔ Secure grip without slipping, even at torque levels exceeding 120 Nm

Overview:
✔ Designed for removal and installation of subframe bushings at the front and rear axle
✔ Suitable for Audi Q7, VW Touareg and Porsche Cayenne
✔ Can be used directly on the vehicle without complete subframe removal
✔ Compatible with both hydraulic and mechanical applications
✔ Suitable for front and rear subframe bushings with similar diameters
✔ Professional workshop tool set comparable to VAG T10301 components

Overview:
✔ Professional tube wrench for shock absorber cartridge service
✔ Designed for opening and tightening strut retaining nuts
✔ Enables replacement of shock absorber cartridges without removing the complete strut assembly
✔ Reduces repair time and labor costs
✔ Suitable for selected Audi and Porsche models
✔ Precision fit for secure engagement
✔ Designed for professional suspension repairs
✔ Workshop-quality construction

Overview:
✔ Professional special tool for 96 mm compact wheel bearing and wheel hub units
✔ Suitable for Mercedes-Benz Sprinter and VW Crafter front axle applications
✔ Designed for compact wheel bearings with integrated wheel hub
✔ Developed for use with hydraulic workshop presses
✔ Optimized half-shell design for improved centering and positioning
✔ Pressure piece with open design for better control during installation
✔ Prepared for future hydraulic on-vehicle applications
✔ Designed for professional workshop use

Overview:
✔ Professional pull spindle for hollow hydraulic cylinder systems
✔ M14 × 2.0 pull thread for extraction and pulling applications
✔ Compatible with hollow hydraulic cylinders using M20 × 2.5 connection thread
✔ Heavy-duty construction for high-load applications
✔ Maximum load capacity up to 9 tons
✔ Suitable for bearing, bushing, hub and suspension service work
✔ Designed for professional workshop use
✔ Compatible with hydraulic pulling systems and tool sets

Overview:
✔ Professional 4-piece removal tool set for third brake lights
✔ Designed for damage-free removal of additional brake lights
✔ Suitable for Mercedes S210 T-Model (1996–2003)
✔ Enables simultaneous release of retaining clips
✔ Manufactured according to original tool specifications
✔ Precise fit for safe and efficient removal
✔ High-quality materials and precise construction

Overview:
✔ Professional indicator fluid for CO₂ leak detection systems
✔ Refill bottle for CO₂ diagnostic devices
✔ Suitable for Item No. 120454, Item No. 20025 and Item No. 123131
✔ Detects exhaust gases in cooling systems
✔ Color changes from blue to green/yellow upon CO₂ contact
✔ Suitable for all water-cooled combustion engines
✔ Capacity: 250 ml

Overview:
✔ Professional SAC clutch alignment tool for BMW transmissions
✔ Designed for precise centering of SAC clutch assemblies during installation
✔ Suitable for BMW vehicles with GS6 and GA6HP transmission types
✔ Ensures correct alignment between clutch disc and transmission input shaft
✔ Helps facilitate gearbox installation and clutch service procedures
✔ Compatible with engines M57T2, N54 and N57
✔ Suitable for workshop and professional automotive applications
✔ Designed for use as BMW 212270 and 83300495449

Overview:
✔ Professional flexible ATF filling adapter for DSG and S-Tronic transmissions
✔ Designed for Audi 7-speed DSG transmissions from 2018 onward
✔ Flexible construction allows easier installation in restricted spaces
✔ Larger internal hose diameter for faster oil filling compared to OE adapter
✔ Suitable for ATF filling on dual clutch transmissions
✔ Compatible with multiple Audi S-Tronic gearbox variants
✔ Ideal for professional transmission service operations
✔ item no. compatible reference: as VAG 6617/15

Overview:
✔ Professional tool set for near-complete draining of automatic transmission oil
✔ Removes residual oil using compressed air after standard draining
✔ Allows extraction of up to 2.6L additional old transmission oil
✔ Designed for BMW, Mercedes-Benz, Audi, Chrysler NAG1 and compatible transmissions
✔ Suitable for BMW 6HP / 8HP and Mercedes 722.6 / 722.9 transmissions
✔ Ensures maximum refill capacity with fresh transmission oil
✔ Reduces contamination from remaining old oil
✔ Ideal for professional automatic transmission servicing

Overview:
✔ Professional shift lever alignment tool for VAG vehicles
✔ Designed for adjustment of gearbox shift cables and linkage systems
✔ Locks the gear lever in adjustment position during setup procedures
✔ Suitable for 5-speed shift tower systems with shift cables
✔ Compatible with Golf II, Golf III, Vento and Polo 6N1
✔ Essential for gear selector basic adjustment procedures
✔ Used as VAG 3285 and U-40026
✔ Suitable for workshop and transmission service applications

Overview:
✔ Professional pull hook with ergonomic T-handle
✔ Suitable for brake spring and handbrake spring removal and installation
✔ Designed for DSG clutch pack removal and workshop service tasks
✔ Suitable for removing ventilation grilles and retaining springs
✔ Universal workshop application for various repair procedures
✔ Durable construction made in Germany
✔ Comfortable handling with precise control
✔ Suitable for professional workshop use